100% Guaranteed Genuine Parts
819043 Whirlpool Refrigerator Defrost Drain Tube Heat Probe
The Top Freezer Refrigerator Drain Strap Kit sits in the evaporator drip pan of the appliance to prevent water from freezing in the drain opening during operation. This kit is specifically designed to be used in top-freezer refrigerators. Note that this part no longer includes installation instructions; for assistance please visit www.servicematters.com. Installing this part will require basic tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drain Strap Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drain Strap Kit
• Tools Needed: Multi screwdriver
Weight : 1.359500 lbs
Dimension : 9.960600 x 5.354300 x 3.543300
Compatible Brands
About this product
The Top Freezer Refrigerator Drain Strap Kit sits in the evaporator drip pan of the appliance to prevent water from freezing in the drain opening during operation. This kit is specifically designed to be used in top-freezer refrigerators. Note that this part no longer includes installation instructions; for assistance please visit www.servicematters.com. Installing this part will require basic tools, some disassembly of the refrigerator and novice repair experience. Remember to unplug refrigerator or shut off the house circuit breaker for the appliance before installing this part.
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drain Strap Kit
• Tools Needed: Multi screwdriver
Part Specification
• This product is a Factory Certified Part. These three words represent quality parts and accessories designed specifically for your appliance. Time tested engineering that meets our strict quality specifications
• This product is a replacement part
• Package contains (1) Top Freezer Refrigerator Drain Strap Kit
• Tools Needed: Multi screwdriver
Weight : 1.359500 lbs
Dimension : 9.960600 x 5.354300 x 3.543300
The following parts are replaced by this product
- 978498
- W10210798
- ER819043
No more associated models for this part.
Step 1: Prepare to Replace Refrigerator Defrost Drain Tube Heat Probe
- Unplug the refrigerator from the wall outlet.
- Pull the refrigerator away from the wall to access the back.
- Locate the defrost drain tube heat probe, which is located on the lower left side of the refrigerator.
- Gather the necessary tools for the job, such as a pair of needle-nose pliers and a flathead screwdriver.
Step 2: Remove the Old Defrost Drain Tube Heat Probe
- Grasp the old defrost drain tube heat probe with the needle-nose pliers and gently pull it off the refrigerator.
- Disconnect the electrical wiring that is connected to the heat probe, using the flathead screwdriver.
- Carefully wrap the wiring around the new heat probe, ensuring that it is securely in place.
Step 3: Install the New Defrost Drain Tube Heat Probe
- Place the new heat probe in the same position as the old one.
- Push the new heat probe into place and make sure that it is secure.
- Reconnect the electrical wiring, making sure that it is properly connected and tightly secured.
Step 4: Test the Refrigerator
- Plug the refrigerator back into the wall outlet, and then turn it on.
- Monitor the defrost cycle for any signs of leakage or resistance.
- If the cycle appears to be running correctly, then the new heat probe has been installed correctly.
Step 5: Clean Up
- Put away all the tools that were used during the process.
- Clean up any debris or dirt left behind during the installation process.
- Push the refrigerator back into place.
Congratulations! You have successfully replaced the 819043 Whirlpool Refrigerator Defrost Drain Tube Heat Probe.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
- Unplug the refrigerator from the wall outlet.
- Pull the refrigerator away from the wall to access the back.
- Locate the defrost drain tube heat probe, which is located on the lower left side of the refrigerator.
- Gather the necessary tools for the job, such as a pair of needle-nose pliers and a flathead screwdriver.
Step 2: Remove the Old Defrost Drain Tube Heat Probe
- Grasp the old defrost drain tube heat probe with the needle-nose pliers and gently pull it off the refrigerator.
- Disconnect the electrical wiring that is connected to the heat probe, using the flathead screwdriver.
- Carefully wrap the wiring around the new heat probe, ensuring that it is securely in place.
Step 3: Install the New Defrost Drain Tube Heat Probe
- Place the new heat probe in the same position as the old one.
- Push the new heat probe into place and make sure that it is secure.
- Reconnect the electrical wiring, making sure that it is properly connected and tightly secured.
Step 4: Test the Refrigerator
- Plug the refrigerator back into the wall outlet, and then turn it on.
- Monitor the defrost cycle for any signs of leakage or resistance.
- If the cycle appears to be running correctly, then the new heat probe has been installed correctly.
Step 5: Clean Up
- Put away all the tools that were used during the process.
- Clean up any debris or dirt left behind during the installation process.
- Push the refrigerator back into place.
Congratulations! You have successfully replaced the 819043 Whirlpool Refrigerator Defrost Drain Tube Heat Probe.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review