5304519906 Frigidaire Dishwasher Motor & Pump Assembly
The Frigidaire 5304519906 Motor & Pump Assembly is an ideal replacement for your dishwasher. A Frigidaire 5304519906 Circulator Pump/Motor Assembly circulates water through the dishwasher so your plates, glasses and utensils are washed thoroughly. Get the Frigidaire 5304519906 Motor & Pump Assembly today and keep you dishwasher running smoothly. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
The Frigidaire 5304519906 Motor & Pump Assembly is an ideal replacement for your dishwasher. A Frigidaire 5304519906 Circulator Pump/Motor Assembly circulates water through the dishwasher so your plates, glasses and utensils are washed thoroughly. Get the Frigidaire 5304519906 Motor & Pump Assembly today and keep you dishwasher running smoothly. We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
DIY Instructions for Replacing the Frigidaire 5304519906 Motor & Pump Assembly
1. Unplug the power cord from your appliance and turn off the water supply to the dishwasher.
2. Carefully pull the appliance away from the wall and, using a flathead screwdriver, remove the access panel that is located at the bottom of the dishwasher.
3. Using a pair of needle-nose pliers, disconnect the wires connected to the old motor and pump assembly.
4. Remove the four screws securing the unit in place, then carefully lift out the old motor/pump assembly.
5. Secure the new motor and pump assembly in the same position with the screws removed earlier and reconnect the wires to the new motor.
6. Place the access panel back in its original position, secure it with the screwdriver, and reestablish the power and water connection to the appliance.
7. Test to make sure the motor/pump is working correctly before restoring power to the appliance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the power cord from your appliance and turn off the water supply to the dishwasher.
2. Carefully pull the appliance away from the wall and, using a flathead screwdriver, remove the access panel that is located at the bottom of the dishwasher.
3. Using a pair of needle-nose pliers, disconnect the wires connected to the old motor and pump assembly.
4. Remove the four screws securing the unit in place, then carefully lift out the old motor/pump assembly.
5. Secure the new motor and pump assembly in the same position with the screws removed earlier and reconnect the wires to the new motor.
6. Place the access panel back in its original position, secure it with the screwdriver, and reestablish the power and water connection to the appliance.
7. Test to make sure the motor/pump is working correctly before restoring power to the appliance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
