100% Guaranteed Genuine Parts
SHOCK ABSORBER BASE
807875 Speed Queen Washer Dryer Shock Absorber Base Kit
Weight : 0.400000 lbs
Dimension : 10.629900 x 2.952700 x 1.771600
Compatible Brands


About this product
807875 Speed Queen Washer Dryer Shock Absorber Base Kit
Weight : 0.400000 lbs
Dimension : 10.629900 x 2.952700 x 1.771600
The following parts are replaced by this product
- 802881P
DIY Guide to Replacing the Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE
This guide will walk you through the process of replacing the Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE – a task that, although difficult, is definitely doable with the right tools and expertise. Here are the steps you'll need to take in order to complete the replacement.
1. Begin by unplugging your Speed Queen washing machine from the wall outlet.
2. Next, open the lid and remove the top access panel.
3. Locate the shock absorber base, which is usually located near the top of the machine.
4. Remove the bolts holding the shock absorber base in place.
5. Carefully lift out the old shock absorber base and set it aside.
6. Insert the new Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE into position and secure with the bolts.
7. Close the lid and access panel and plug the machine back into the wall outlet.
8. Test the washer to ensure the shock absorber base is working properly.
By following these simple steps, you'll be able to replace the Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE in no time. Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This guide will walk you through the process of replacing the Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE – a task that, although difficult, is definitely doable with the right tools and expertise. Here are the steps you'll need to take in order to complete the replacement.
1. Begin by unplugging your Speed Queen washing machine from the wall outlet.
2. Next, open the lid and remove the top access panel.
3. Locate the shock absorber base, which is usually located near the top of the machine.
4. Remove the bolts holding the shock absorber base in place.
5. Carefully lift out the old shock absorber base and set it aside.
6. Insert the new Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE into position and secure with the bolts.
7. Close the lid and access panel and plug the machine back into the wall outlet.
8. Test the washer to ensure the shock absorber base is working properly.
By following these simple steps, you'll be able to replace the Speed Queen 807875 KIT ASSY SHOCK ABSORBER BASE in no time. Good luck!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review