100% Guaranteed Genuine Parts
804083WP Speed Queen Complete Door Assembly Kit
804083WP Speed Queen Complete Door Assembly Kit
About this product
804083WP Speed Queen Complete Door Assembly Kit
The following parts are replaced by this product
- 804083W
1. Unplug the Speed Queen 804083WP ASSY DOOR-COMPLETE-STANDARD washing machine from the wall outlet.
2. Place a towel on the floor in front of the washer to protect the surface and catch any spills.
3. Take off the top panel of the cabinet by unscrewing the four screws located at the back.
4. Take off the left and right side panels of the cabinet by unscrewing the two screws located at the back of each panel.
5. Disconnect the power wires by using a screwdriver to loosen the screws connected to the washer’s power wires.
6. Disconnect the water hose from the water supply valve by loosening the nut at the connector.
7. Loosen the screws on the door hinge and remove the old door.
8. Take out the new Speed Queen 804083WP ASSY DOOR-COMPLETE-STANDARD door and align it with the mounting holes.
9. Secure the door with the screws and tighten them securely.
10. Reattach the power wires to the washer’s power wires and secure them with screws.
11. Reattach the water hose to the water supply valve and tighten the nut at the connector.
12. Put back the left and right side panels of the cabinet, making sure they are properly aligned.
13. Put back the top panel of the cabinet and secure it with the four screws located at the back.
14. Plug the washer into the wall outlet.
15. Turn on the washer to test if the Speed Queen 804083WP ASSY DOOR-COMPLETE-STANDARD door has been properly installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Place a towel on the floor in front of the washer to protect the surface and catch any spills.
3. Take off the top panel of the cabinet by unscrewing the four screws located at the back.
4. Take off the left and right side panels of the cabinet by unscrewing the two screws located at the back of each panel.
5. Disconnect the power wires by using a screwdriver to loosen the screws connected to the washer’s power wires.
6. Disconnect the water hose from the water supply valve by loosening the nut at the connector.
7. Loosen the screws on the door hinge and remove the old door.
8. Take out the new Speed Queen 804083WP ASSY DOOR-COMPLETE-STANDARD door and align it with the mounting holes.
9. Secure the door with the screws and tighten them securely.
10. Reattach the power wires to the washer’s power wires and secure them with screws.
11. Reattach the water hose to the water supply valve and tighten the nut at the connector.
12. Put back the left and right side panels of the cabinet, making sure they are properly aligned.
13. Put back the top panel of the cabinet and secure it with the four screws located at the back.
14. Plug the washer into the wall outlet.
15. Turn on the washer to test if the Speed Queen 804083WP ASSY DOOR-COMPLETE-STANDARD door has been properly installed.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review