100% Guaranteed Genuine Parts
37922P Speed Queen Timer 115V 60Hz 6 Cycle
37922P Speed Queen Timer 115V 60Hz 6 Cycle
About this product
37922P Speed Queen Timer 115V 60Hz 6 Cycle
Step 1: Disconnect the Power Source
Unplug the unit or turn off the breaker in your fuse box responsible for powering the unit.
Step 2: Remove Existing Timer
Using a screwdriver, remove the screws that secure the front panel of the Speed Queen 37922P to the unit (there should be two of them). Carefully remove the front panel, making sure not to damage it. Once the front panel is removed, you should have access to the timer control. Loosen the screws that hold the timer control in place and carefully disconnect the wires connected to the timer. Pull the timer out of the machine.
Step 3: Replace with New Timer
Place the new timer in the same position as the old one and re-connect the wires in the same manner as they were before. Make sure to secure the screws tight so the timer won’t move and become damaged.
Step 4: Put Back the Front Panel
Carefully place back the front panel of the Speed Queen 37922P and tighten the screws. Make sure that all the wires are safely tucked away.
Step 5: Test the Timer
Once the panel is secured, plug the unit back in or turn on the breaker. Turn the timer to each cycle setting and run the machine to ensure the new timer is functioning properly.
Following these simple steps should ensure proper installation of the Speed Queen 37922P Timer,115V,60HZ,6 Cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Unplug the unit or turn off the breaker in your fuse box responsible for powering the unit.
Step 2: Remove Existing Timer
Using a screwdriver, remove the screws that secure the front panel of the Speed Queen 37922P to the unit (there should be two of them). Carefully remove the front panel, making sure not to damage it. Once the front panel is removed, you should have access to the timer control. Loosen the screws that hold the timer control in place and carefully disconnect the wires connected to the timer. Pull the timer out of the machine.
Step 3: Replace with New Timer
Place the new timer in the same position as the old one and re-connect the wires in the same manner as they were before. Make sure to secure the screws tight so the timer won’t move and become damaged.
Step 4: Put Back the Front Panel
Carefully place back the front panel of the Speed Queen 37922P and tighten the screws. Make sure that all the wires are safely tucked away.
Step 5: Test the Timer
Once the panel is secured, plug the unit back in or turn on the breaker. Turn the timer to each cycle setting and run the machine to ensure the new timer is functioning properly.
Following these simple steps should ensure proper installation of the Speed Queen 37922P Timer,115V,60HZ,6 Cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review