200927P Speed Queen Washer Timer 115/60 3 Cycle 1 Spe
Timer, 115/60 3 cycle 1 speed works with some Speed Queen, and Amana models of washing machines.
Timer, 115/60 3 cycle 1 speed works with some Speed Queen, and Amana models of washing machines.
Write Your Own Review
DIY Guide on Replacing a 200927P Speed Queen Washer Timer, 115/60 3 Cycle 1 Speed
Do you need to replace the timer on a 200927P Speed Queen Washer? This guide will show you how to do it safely and efficiently.
1. Unplug the washer from the electrical outlet and turn off the water supply. It's important to remember to shut off the water supply before you begin work on any washer.
2. Remove the control panel on the front of the washer. To do this you will need a screwdriver. Unscrew the screws securing the control panel to the washer frame.
3. Remove the back cover of the washer. This may require a Phillips head screwdriver. Be sure to keep track of which screws go where as you will need them to reassemble the washer.
4. Locate the timer. It will be located near the back of the washer.
5. Disconnect the wires from the timer and remove the timer from the washer.
6. Install the new timer. Connect the wires to the new timer and secure it in place with the screws you removed earlier.
7. Reassemble the washer by replacing the back cover and control panel. Secure both with the screws you removed when taking the washer apart.
8. Turn the water supply back on and plug the washer into an electrical outlet.
Now you have successfully replaced your 200927P Speed Queen Washer timer. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Do you need to replace the timer on a 200927P Speed Queen Washer? This guide will show you how to do it safely and efficiently.
1. Unplug the washer from the electrical outlet and turn off the water supply. It's important to remember to shut off the water supply before you begin work on any washer.
2. Remove the control panel on the front of the washer. To do this you will need a screwdriver. Unscrew the screws securing the control panel to the washer frame.
3. Remove the back cover of the washer. This may require a Phillips head screwdriver. Be sure to keep track of which screws go where as you will need them to reassemble the washer.
4. Locate the timer. It will be located near the back of the washer.
5. Disconnect the wires from the timer and remove the timer from the washer.
6. Install the new timer. Connect the wires to the new timer and secure it in place with the screws you removed earlier.
7. Reassemble the washer by replacing the back cover and control panel. Secure both with the screws you removed when taking the washer apart.
8. Turn the water supply back on and plug the washer into an electrical outlet.
Now you have successfully replaced your 200927P Speed Queen Washer timer. Congratulations!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
