NC1MV90ALP/ASH Samsung Refrigerator Compressor Compressor

Introduction

Replacing the Samsung refrigerator compressor can be a daunting task for the average person. Fortunately, it is a relatively straightforward process that requires little expertise and very few tools. This DIY guide will provide step by step instructions on how to replace the NC1MV90ALP/ASH Samsung refrigerator compressor, CMP. Let’s get started.

Tools and Materials You Need

* Screw driver
* Replacement compressor (NC1MV90ALP/ASH)
* Pliers
* Electric drill

Step-by-Step Instructions

Step 1: Unplug your refrigerator’s power supply and shut off the water line attached to the refrigerator if any.

Step 2: Remove all parts inside the refrigerator that can potentially hinder the replacement process. This includes food, drinks, shelves, shelves, etc.,

Step 3: Use a screw driver to remove the screws that secure the old compressor in place.

Step 4: Pull out the old compressor from the refrigerator, as this may be a bit tricky because of its weight.

Step 5: Insert the new compressor in the same spot and secure it with the screws you removed.

Step 6: Connect the new compressor’s wiring to the refrigerator’s wiring and make sure that all connections are tight.

Step 7: Once all connections are made and secured, you can re-connect the refrigerator’s power supply and reconnect the water line to the refrigerator, if any, and turn on the power.

Step 8: Check for leaks and make sure the compressor is functioning properly.

Conclusion

Replacing the Samsung refrigerator compressor may look like a daunting task but with the right tools and step by step instructions, it can be done easily by any average person. We hope this guide on how to replace the NC1MV90ALP/ASH Samsung refrigerator compressor, CMP has helped you in replacing your own compressor. Good luck!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.