DE96-01027A Samsung Oven Range Display Board Module Assembly
Display board module assembly for some models of Samsung range ovens.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Display board module assembly for some models of Samsung range ovens.
Write Your Own Review
The following parts are replaced by this product
- DE96-01027A
- DE96-01027A
DIY Instructions on Replacing the DE96-01027A Samsung Oven Range Display Board Module Assembly
1. Shut off power to the oven range. Unplug it from the wall or flip the circuit breaker to the off position.
2. Remove the screws that hold the display board module assembly in place. When you have removed all the necessary screws, take out the assembly and set it aside.
3. Disconnect the electrical connections from the old display board module assembly and remove them completely.
4. Take the new DE96-01027A display board module assembly and connect the electrical connections.
5. Replace the screws to secure the new display board module assembly in place.
6. Plug the oven range back into the wall or turn the circuit breaker back on to restore power.
7. Test the oven range to ensure the new display board module assembly is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Shut off power to the oven range. Unplug it from the wall or flip the circuit breaker to the off position.
2. Remove the screws that hold the display board module assembly in place. When you have removed all the necessary screws, take out the assembly and set it aside.
3. Disconnect the electrical connections from the old display board module assembly and remove them completely.
4. Take the new DE96-01027A display board module assembly and connect the electrical connections.
5. Replace the screws to secure the new display board module assembly in place.
6. Plug the oven range back into the wall or turn the circuit breaker back on to restore power.
7. Test the oven range to ensure the new display board module assembly is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
