Online Sale!
100% Guaranteed Genuine Parts
DE81-10400A Samsung Spring Assembly
DE81-10400A Samsung Spring
Weight : 0.04 lbs
Dimension : 3.03 x 1.14 x 1.54
Compatible Brands
About this product
DE81-10400A Samsung Spring
Weight : 0.04 lbs
Dimension : 3.03 x 1.14 x 1.54
The following parts are replaced by this product
- 66523
No more associated models for this part.
DIY Instructions for Replacing the Samsung DE81-10400A SVC-SPRING-DOR:
1. Turn off the power to your device before beginning the repair process. Unplug your device from its power source.
2. Use a Phillips screwdriver to unscrew the screws that hold the front panel and back panel in place. Carefully remove both panels from the appliance.
3. Locate the broken spring. It is usually located in the middle of the door. Remove it by pulling it out carefully. Be sure to inspect the surroundings to make sure that no additional pieces have come loose.
4. Replace the old spring with a new one. Make sure that the new spring is made of the same material and is the same size as the old spring.
5. Secure the new spring in place by using screws and bolts. Make sure that all screws and bolts are tight.
6. Reconnect the power to your device. Carefully attach the front panel and back panels onto your device and tighten all screws.
7. Test your device to make sure that the new spring is functioning correctly.
Congratulations! You have just replaced the Samsung DE81-10400A SVC-SPRING-DOR!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Turn off the power to your device before beginning the repair process. Unplug your device from its power source.
2. Use a Phillips screwdriver to unscrew the screws that hold the front panel and back panel in place. Carefully remove both panels from the appliance.
3. Locate the broken spring. It is usually located in the middle of the door. Remove it by pulling it out carefully. Be sure to inspect the surroundings to make sure that no additional pieces have come loose.
4. Replace the old spring with a new one. Make sure that the new spring is made of the same material and is the same size as the old spring.
5. Secure the new spring in place by using screws and bolts. Make sure that all screws and bolts are tight.
6. Reconnect the power to your device. Carefully attach the front panel and back panels onto your device and tighten all screws.
7. Test your device to make sure that the new spring is functioning correctly.
Congratulations! You have just replaced the Samsung DE81-10400A SVC-SPRING-DOR!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review