Online Sale!
100% Guaranteed Genuine Parts
DE81-10350A Samsung Microwave Knob Assembly
DE81-10350A Samsung Oven Knob
Compatible Brands
About this product
DE81-10350A Samsung Oven Knob
The following parts are replaced by this product
- 108495-01
- 108495
No more associated models for this part.
1. Disconnect power to the range/oven. Make sure that the oven is completely off and unplugged from the wall.
2. Remove the screws from the back of the range that hold the control panel in place. Carefully pull the control panel away from the range and set aside.
3. Locate the Samsung DE81-10350A SVC-KNOB on the control board. There should be two screws holding the knob in place.
4. Remove the screws and gently pull out the knob.
5. Insert the new SVC-KNOB into the control board, making sure to properly align it.
6. Secure the new SVC-KNOB with the screws.
7. Reattach the control panel and replace the screws.
8. Reconnect power to the range/oven and test the new SVC-KNOB.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the screws from the back of the range that hold the control panel in place. Carefully pull the control panel away from the range and set aside.
3. Locate the Samsung DE81-10350A SVC-KNOB on the control board. There should be two screws holding the knob in place.
4. Remove the screws and gently pull out the knob.
5. Insert the new SVC-KNOB into the control board, making sure to properly align it.
6. Secure the new SVC-KNOB with the screws.
7. Reattach the control panel and replace the screws.
8. Reconnect power to the range/oven and test the new SVC-KNOB.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review