Online Sale!
100% Guaranteed Genuine Parts
DE81-09578A Samsung Keyboard PCBA Service
SVC-KEYBOARD PCBA
Weight : 0.15 lbs
Dimension : 5.94 x 2.80 x 1.26
Compatible Brands
About this product
SVC-KEYBOARD PCBA
Weight : 0.15 lbs
Dimension : 5.94 x 2.80 x 1.26
The following parts are replaced by this product
- 82633
No more associated models for this part.
DIY Instructions for Replacing the Samsung DE81-09578A SVC-KEYBOARD PCBA
1. Gather the tools you need: Phillips screwdriver, needle-nose pliers, and replacement Samsung DE81-09578A SVC-KEYBOARD PCBA.
2. Turn off your computer and ensure it is unplugged from the power source before starting.
3. Carefully remove the screws holding the back cover of your computer with a Phillips screwdriver. Then, gently lift off the back cover.
4. Locate the SVC-KEYBOARD PCBA and remove it by pulling gently with a pair of needle-nose pliers.
5. Take the new SVC-KEYBOARD PCBA and connect its cables to the motherboard.
6. Secure the SVC-KEYBOARD PCBA in place by replacing the screws.
7. Replace the back cover of your computer and tighten its screws with the Phillips screw driver.
8. Plug in the power source and turn your computer on.
9. Test out your new SVC-KEYBOARD PCBA and make sure it is working properly.
Congratulations! You have just successfully replaced your Samsung DE81-09578A SVC-KEYBOARD PCBA.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather the tools you need: Phillips screwdriver, needle-nose pliers, and replacement Samsung DE81-09578A SVC-KEYBOARD PCBA.
2. Turn off your computer and ensure it is unplugged from the power source before starting.
3. Carefully remove the screws holding the back cover of your computer with a Phillips screwdriver. Then, gently lift off the back cover.
4. Locate the SVC-KEYBOARD PCBA and remove it by pulling gently with a pair of needle-nose pliers.
5. Take the new SVC-KEYBOARD PCBA and connect its cables to the motherboard.
6. Secure the SVC-KEYBOARD PCBA in place by replacing the screws.
7. Replace the back cover of your computer and tighten its screws with the Phillips screw driver.
8. Plug in the power source and turn your computer on.
9. Test out your new SVC-KEYBOARD PCBA and make sure it is working properly.
Congratulations! You have just successfully replaced your Samsung DE81-09578A SVC-KEYBOARD PCBA.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review