Online Sale!
100% Guaranteed Genuine Parts
DE81-09412A Samsung Grease Filter
DE81-09412A Samsung Grease Filter
Weight : 0.65 lbs
Dimension : 8.98 x 6.38 x 1.57
Compatible Brands
About this product
DE81-09412A Samsung Grease Filter
Weight : 0.65 lbs
Dimension : 8.98 x 6.38 x 1.57
The following parts are replaced by this product
- 66225
No more associated models for this part.
Replacing the Samsung DE81-09412A SVC-GREASE Filter for Vent Hoods - DIY Instructions
1. Gather all the necessary tools. You will need a screwdriver, Phillips head or flathead depending on your vent hood, wire cutters or pliers, a new filter, and a ladder or stepstool if necessary.
2. Make sure the power to the hood is off by unplugging it or turning off the circuit breaker.
3. Locate the filter. It should be inside the vent hood, near the top. The filter should have a metal frame and be held in place by screws.
4. Remove the screws holding the filter in place and set them aside.
5. Pull the filter out carefully, as it may still contain grease and other debris.
6. Use the wire cutters or pliers to remove any remaining bits of metal or plastic that may be in the filter frame.
7. Insert the new filter into the frame and secure it with the screws you removed earlier.
8. Clean the area around the filter, then turn the power back on to the vent hood.
Congratulations! You just replaced the Samsung DE81-09412A SVC-GREASE Filter for your vent hood.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather all the necessary tools. You will need a screwdriver, Phillips head or flathead depending on your vent hood, wire cutters or pliers, a new filter, and a ladder or stepstool if necessary.
2. Make sure the power to the hood is off by unplugging it or turning off the circuit breaker.
3. Locate the filter. It should be inside the vent hood, near the top. The filter should have a metal frame and be held in place by screws.
4. Remove the screws holding the filter in place and set them aside.
5. Pull the filter out carefully, as it may still contain grease and other debris.
6. Use the wire cutters or pliers to remove any remaining bits of metal or plastic that may be in the filter frame.
7. Insert the new filter into the frame and secure it with the screws you removed earlier.
8. Clean the area around the filter, then turn the power back on to the vent hood.
Congratulations! You just replaced the Samsung DE81-09412A SVC-GREASE Filter for your vent hood.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review