DE81-08968A Samsung Membrane Er48d

Step 1: Unplug your Samsung DE81-08968A SVC-MEMBRANE and make sure that it is completely powered down.

Step 2: Use a Phillips head screwdriver to remove the four screws located at the back of the unit.

Step 3: Carefully lift the back panel of the unit to expose the internal components.

Step 4: Disconnect the old SVC-MEMBRANE from its power supply by carefully pulling out the wires connected to it.

Step 5: Place the new SVC-MEMBRANE into position, and then re-connect the wires to its power supply.

Step 6: Secure the new SVC-MEMBRANE with the four screws you initially removed.

Step 7: Test the new SVC-MEMBRANE by powering up your unit and checking that it is operational.

Step 8: Clean up any debris from the process and make sure no wires are exposed and hazardous.

And you're done! Your Samsung DE81-08968A SVC-MEMBRANE is now replaced.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.