Online Sale!
100% Guaranteed Genuine Parts
DE81-08848A Samsung Wine Cooler Zero Door Hinge DT
Svc-hinge door dt works with some Samsung models of wine coolers.
Weight : 0.12 lbs
Package Dimension : 10.43 x 2.01 x 0.83
About this product
Svc-hinge door dt works with some Samsung models of wine coolers.
Weight : 0.12 lbs
Package Dimension : 10.43 x 2.01 x 0.83
The following parts are replaced by this product
- 108008
Introduction
Replacing the DE81-08848A Samsung Wine Cooler SVC-Hinge Door DT does not require any special tools and can be done in only a few minutes. The following instructions will take you through the process of replacing this door hinge step-by-step.
Step 1: Turn the power off to the wine cooler
Before you begin, make sure the power is turned off to the unit by unplugging the power cord from the wall outlet.
Step 2: Remove the screws that hold the hinge door
Using a Phillips head screwdriver, remove the two screws located on the top-right and bottom-left side of the door hinge. Once the screws are removed, you can simply pull the hinge door off of the appliance.
Step 3: Install the new DE81-08848A Samsung Wine Cooler SVC-Hinge Door DT
Now that the old hinge door has been removed, it’s time to install the replacement. Place the new hinge door onto the appliance and use the same screws that were removed earlier to secure it in place.
Step 4: Test the new door hinge
Now, plug the power cord into the outlet and turn the power back on. Open and close the door a few times to ensure the hinge is working properly.
Conclusion
That’s it! Replacing the DE81-08848A Samsung Wine Cooler SVC-Hinge Door DT is now complete. This quick and easy process should take no more than a few minutes and requires minimal tools.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the DE81-08848A Samsung Wine Cooler SVC-Hinge Door DT does not require any special tools and can be done in only a few minutes. The following instructions will take you through the process of replacing this door hinge step-by-step.
Step 1: Turn the power off to the wine cooler
Before you begin, make sure the power is turned off to the unit by unplugging the power cord from the wall outlet.
Step 2: Remove the screws that hold the hinge door
Using a Phillips head screwdriver, remove the two screws located on the top-right and bottom-left side of the door hinge. Once the screws are removed, you can simply pull the hinge door off of the appliance.
Step 3: Install the new DE81-08848A Samsung Wine Cooler SVC-Hinge Door DT
Now that the old hinge door has been removed, it’s time to install the replacement. Place the new hinge door onto the appliance and use the same screws that were removed earlier to secure it in place.
Step 4: Test the new door hinge
Now, plug the power cord into the outlet and turn the power back on. Open and close the door a few times to ensure the hinge is working properly.
Conclusion
That’s it! Replacing the DE81-08848A Samsung Wine Cooler SVC-Hinge Door DT is now complete. This quick and easy process should take no more than a few minutes and requires minimal tools.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Login and Registration Form