Online Sale!
100% Guaranteed Genuine Parts
DE81-06165A Samsung Top Cap Assembly D Dual Brass
Surface burner cap works with some Dacor models of stoves / ovens / ranges.
Weight : 0.236400 lbs
Dimension : 4.330700 x 3.779500 x 2.007800
Compatible Brands
About this product
Surface burner cap works with some Dacor models of stoves / ovens / ranges.
Weight : 0.236400 lbs
Dimension : 4.330700 x 3.779500 x 2.007800
The following parts are replaced by this product
- 92230
No more associated models for this part.
How to Replace the Samsung DE81-06165A SVC-TOP CAP D DUAL BRASS
It's important to properly replace the SVC-TOP CAP D DUAL BRASS on the Samsung DE81-06165A to ensure continued water-tightness and proper operation of your washing machine. Follow these steps to complete the replacement process with ease.
Materials & Tools Needed:
- Samsung DE81-06165A SVC-TOP CAP D DUAL BRASS
- Pliers
- Hex key set
- Screwdriver
- Utility knife
Step 1: Unplug the washing machine from the wall outlet and turn off the water supply. Disconnect the hoses from both the cold and hot water inlet valves and move the machine to an open space.
Step 2: Using a hex key set remove the four screws on the top panel, located at the back of the machine. Carefully remove the top panel and set aside.
Step 3: Locate the defective SVC-TOP CAP D DUAL BRASS and unscrew it using pliers. Once unscrewed, carefully remove it from the back of the machine.
Step 4: Take the new SVC-TOP CAP D DUAL BRASS and attach it to the back of the machine using the same screws you used to remove the old one. Secure the cap tightly to ensure a leak-proof seal.
Step 5: Reconnect the hoses to the water inlet valves and plug the machine back into the wall outlet. Turn on the water supply and power the machine on. Run a quick cycle and check if there are any leaks.
Step 6: Finally, reattach the top panel on the machine and secure it with the four screws you removed initially.
Your Samsung DE81-06165A machine is now equipped with a fresh SVC-TOP CAP D DUAL BRASS and ready to handle your laundry duties with ease.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
It's important to properly replace the SVC-TOP CAP D DUAL BRASS on the Samsung DE81-06165A to ensure continued water-tightness and proper operation of your washing machine. Follow these steps to complete the replacement process with ease.
Materials & Tools Needed:
- Samsung DE81-06165A SVC-TOP CAP D DUAL BRASS
- Pliers
- Hex key set
- Screwdriver
- Utility knife
Step 1: Unplug the washing machine from the wall outlet and turn off the water supply. Disconnect the hoses from both the cold and hot water inlet valves and move the machine to an open space.
Step 2: Using a hex key set remove the four screws on the top panel, located at the back of the machine. Carefully remove the top panel and set aside.
Step 3: Locate the defective SVC-TOP CAP D DUAL BRASS and unscrew it using pliers. Once unscrewed, carefully remove it from the back of the machine.
Step 4: Take the new SVC-TOP CAP D DUAL BRASS and attach it to the back of the machine using the same screws you used to remove the old one. Secure the cap tightly to ensure a leak-proof seal.
Step 5: Reconnect the hoses to the water inlet valves and plug the machine back into the wall outlet. Turn on the water supply and power the machine on. Run a quick cycle and check if there are any leaks.
Step 6: Finally, reattach the top panel on the machine and secure it with the four screws you removed initially.
Your Samsung DE81-06165A machine is now equipped with a fresh SVC-TOP CAP D DUAL BRASS and ready to handle your laundry duties with ease.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review