DE81-03928A Samsung Spark Module 6 Point Kit

Replacing the Samsung DE81-03928A SVC-SPARK MODULE 6 POINT KIT

Replacing the Samsung DE81-03928A SVC-SPARK MODULE 6 POINT KIT is a simple and straightforward process that can be done with basic hand tools and a few safety precautions. By following these steps, anyone can easily replace their Samsung DE81-03928A SVC-SPARK Module 6 Point Kit.

Tools:
-Safety glasses
-Utility knife
-Screwdriver
-Wire cutters or pliers

Instructions:

1. Begin by shutting off all power to your appliance. Unplug the power cord from the wall outlet or flip the circuit breaker switch.

2. Carefully remove the old module from the appliance. Be sure to exercise caution when doing this as the module will be wired in place. Use the utility knife to disengage the wires connected to the terminal clips.

3. Once the module has been disconnected and removed, use the wire cutters or pliers to cut away any excess wire.

4. Connect the new SVC-SPARK module to the wiring harness.

5. Secure the module in place with the mounting screws included with your replacement kit.

6. Turn the power back on to the appliance and test the new SVC-SPARK module.

7. If everything is working correctly, you are done.

Congrats! You just replaced the Samsung DE81-03928A SVC-SPARK MODULE 6 POINT KIT!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.