DE63-30016G Samsung Microwave Charcoal Filter
DE63-30016G Samsung Microwave Charcoal Filter
DE63-30016G Samsung Microwave Charcoal Filter
Write Your Own Review
DIY Instructions for Replacing the DE63-30016G Samsung Microwave Charcoal Filter
1. Locate the filter. The DE63-30016G charcoal filter is located behind the grille at the top of your Samsung microwave. To access the filter, you'll need to remove the grille.
2. Disconnect the power. To ensure your safety during the installation process, make sure to disconnect the power to your Samsung microwave before beginning by unplugging the cord from the wall outlet.
3. Remove the grille. Unscrew the screws on either side of the grille and pull it off gently.
4. Remove the old filter. Reach in and locate the old filter. Squeeze the sides of the filter and lift it up and out of the unit.
5. Install the new filter. Insert the new filter into the unit, taking care to make sure that it is properly seated in the correct position.
6. Replace the grille. Secure the grille to the top of the unit using the screws that were removed earlier.
7. Plug in the power source. Plug the cord back into the wall outlet and restore power to the unit.
8. Reset the filter indicator. After the installation process is complete, you can reset the filter indicator light on your microwave by pressing the reset button.
These DIY instructions will help you easily replace the DE63-30016G Samsung Microwave Charcoal Filter. Remember to always follow basic safety precautions, and if you are ever unsure about a step or procedure, contact a professional for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Locate the filter. The DE63-30016G charcoal filter is located behind the grille at the top of your Samsung microwave. To access the filter, you'll need to remove the grille.
2. Disconnect the power. To ensure your safety during the installation process, make sure to disconnect the power to your Samsung microwave before beginning by unplugging the cord from the wall outlet.
3. Remove the grille. Unscrew the screws on either side of the grille and pull it off gently.
4. Remove the old filter. Reach in and locate the old filter. Squeeze the sides of the filter and lift it up and out of the unit.
5. Install the new filter. Insert the new filter into the unit, taking care to make sure that it is properly seated in the correct position.
6. Replace the grille. Secure the grille to the top of the unit using the screws that were removed earlier.
7. Plug in the power source. Plug the cord back into the wall outlet and restore power to the unit.
8. Reset the filter indicator. After the installation process is complete, you can reset the filter indicator light on your microwave by pressing the reset button.
These DIY instructions will help you easily replace the DE63-30016G Samsung Microwave Charcoal Filter. Remember to always follow basic safety precautions, and if you are ever unsure about a step or procedure, contact a professional for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
