Online Sale!
100% Guaranteed Genuine Parts
DD94-01030A Samsung Dishwasher Vent Fan Motor
Dry Duct Assembly works with some models of Samsung Dishwashers
Weight : 17.969600 lbs
Dimension : 4.330700 x 24.015800 x 24.015800
About this product
Dry Duct Assembly works with some models of Samsung Dishwashers
Weight : 17.969600 lbs
Dimension : 4.330700 x 24.015800 x 24.015800
Step-by-Step Guide to Replacing the DD94-01030A Samsung Dishwasher Dry Duct Assembly
1. Unplug the dishwasher from the wall outlet and shut off all power sources.
2. Open the dishwasher door and locate the screws behind the kick plate that secure the bottom cover panel in place.
3. Remove any screws securing the bottom cover panel, then carefully pull the panel away to reveal the appliance interior.
4. Locate the dry duct assembly and remove the screws that secure it in place. Use a flathead screwdriver if necessary.
5. Carefully pull the old dry duct assembly away and discard it.
6. Insert the replacement dry duct assembly into place and secure it with the screws you removed earlier.
7. Reconnect the power source and plug the dishwasher back in.
8. Turn on the power and test the dishwasher to make sure the new dry duct assembly is functioning properly.
9. Replace the bottom cover panel and secure with the screws removed before.
10. Restore power to the dishwasher and run a test cycle to ensure everything is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the dishwasher from the wall outlet and shut off all power sources.
2. Open the dishwasher door and locate the screws behind the kick plate that secure the bottom cover panel in place.
3. Remove any screws securing the bottom cover panel, then carefully pull the panel away to reveal the appliance interior.
4. Locate the dry duct assembly and remove the screws that secure it in place. Use a flathead screwdriver if necessary.
5. Carefully pull the old dry duct assembly away and discard it.
6. Insert the replacement dry duct assembly into place and secure it with the screws you removed earlier.
7. Reconnect the power source and plug the dishwasher back in.
8. Turn on the power and test the dishwasher to make sure the new dry duct assembly is functioning properly.
9. Replace the bottom cover panel and secure with the screws removed before.
10. Restore power to the dishwasher and run a test cycle to ensure everything is working correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review