Online Sale!
100% Guaranteed Genuine Parts
DD81-02011A Samsung Dishwasher Assembly Micro Filter
Micro Filter Assembly works with some models of Samsung Dishwashers
Weight : 0.403900 lbs
Dimension : 3.622000 x 3.937000 x 3.937000
Compatible Brands
About this product
Micro Filter Assembly works with some models of Samsung Dishwashers
Weight : 0.403900 lbs
Dimension : 3.622000 x 3.937000 x 3.937000
No more associated models for this part.
Replacing the DD81-02011A Samsung Dishwasher Micro Filter Assembly
1. Unplug the dishwasher from the power source. Make sure the water supply has been shut off as well.
2. Turn off the sink faucet and remove any dishes that may be in the dishwasher.
3. Remove the lower rack and set aside.
4. Open the door of the dishwasher, remove the fake panel at the top of the dishwasher, and then unscrew the screws holding the housing of the micro filter assembly.
5. Take out the old micro filter assembly and discard it.
6. Take the new micro filter assembly and insert it into place, making sure it is securely fixed in place.
7. Put the fake panel back on top, reinstall the screws, close the door and plug the dishwasher back in to the power source.
8. Turn the sink faucet back on and test out the dishwasher to make sure it works properly.
By following these steps, you can successfully replace the DD81-02011A Samsung Dishwasher Micro Filter Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the dishwasher from the power source. Make sure the water supply has been shut off as well.
2. Turn off the sink faucet and remove any dishes that may be in the dishwasher.
3. Remove the lower rack and set aside.
4. Open the door of the dishwasher, remove the fake panel at the top of the dishwasher, and then unscrew the screws holding the housing of the micro filter assembly.
5. Take out the old micro filter assembly and discard it.
6. Take the new micro filter assembly and insert it into place, making sure it is securely fixed in place.
7. Put the fake panel back on top, reinstall the screws, close the door and plug the dishwasher back in to the power source.
8. Turn the sink faucet back on and test out the dishwasher to make sure it works properly.
By following these steps, you can successfully replace the DD81-02011A Samsung Dishwasher Micro Filter Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review