DC66-00395A Samsung Dryer Door Lever Strike Latch
Door lever strike latch for some models of Samsung dryers.
Door lever strike latch for some models of Samsung dryers.
Write Your Own Review
Step 1: Unplug the dryer cord and move the dryer away from the wall. Make sure that the plug is out of reach to avoid any shock hazard.
Step 2: Disassemble the dryer door by unscrewing the four screws that are located on each side of the door.
Step 3: Carefully lift off the door and remove the interior panel.
Step 4: Unscrew the DC66-00395A Samsung Dryer Door Lever Strike Latch from the dryer.
Step 5: Fit the new DC66-00395A Samsung Dryer Door Lever Strike Latch into the door and secure it in place with the screws.
Step 6: Place the interior panel back onto the door and re-secure all four screws.
Step 7: Place the door back onto the dryer and plug the dryer into the wall.
Step 8: Test the new DC66-00395A Samsung Dryer Door Lever Strike Latch to ensure that it is properly installed and functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Disassemble the dryer door by unscrewing the four screws that are located on each side of the door.
Step 3: Carefully lift off the door and remove the interior panel.
Step 4: Unscrew the DC66-00395A Samsung Dryer Door Lever Strike Latch from the dryer.
Step 5: Fit the new DC66-00395A Samsung Dryer Door Lever Strike Latch into the door and secure it in place with the screws.
Step 6: Place the interior panel back onto the door and re-secure all four screws.
Step 7: Place the door back onto the dryer and plug the dryer into the wall.
Step 8: Test the new DC66-00395A Samsung Dryer Door Lever Strike Latch to ensure that it is properly installed and functioning correctly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
