DA97-11092B Samsung Refrigerator Ice Maker Assembly
Samsung Sears Kenmore Refrigerator ICE MAKER ASSEMBLY DA97-11092B
Samsung Sears Kenmore Refrigerator ICE MAKER ASSEMBLY DA97-11092B
Write Your Own Review
Step 1: Unplug the refrigerator and turn off the water supply.
Step 2: Remove any items stored below the refrigerator, including drawers and shelves.
Step 3: Pull the refrigerator away from the wall to access the back panel.
Step 4: Locate the screws that are holding the back panel in place and remove them.
Step 5: Carefully lift out the back panel to reveal the ICE MAKER.
Step 6: Disconnect the water line going to the ICEMAKER and then unscrew the two mounting screws that are securing the ICEMAKER assembly to the refrigerator wall.
Step 7: Gently pull out the ice maker and slide it out of the housing.
Step 8: Take the new DA97-11092B Samsung Refrigerator Ice Maker Assembly and attach it to the refrigerator wall with the mounting screws.
Step 9: Reconnect the water line and make sure it is secured to the refrigerator wall.
Step 10: Position the back panel and return the screws to secure it in place.
Step 11: Plug in the refrigerator and turn on the water supply.
Step 12: Test the new Ice Maker for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2: Remove any items stored below the refrigerator, including drawers and shelves.
Step 3: Pull the refrigerator away from the wall to access the back panel.
Step 4: Locate the screws that are holding the back panel in place and remove them.
Step 5: Carefully lift out the back panel to reveal the ICE MAKER.
Step 6: Disconnect the water line going to the ICEMAKER and then unscrew the two mounting screws that are securing the ICEMAKER assembly to the refrigerator wall.
Step 7: Gently pull out the ice maker and slide it out of the housing.
Step 8: Take the new DA97-11092B Samsung Refrigerator Ice Maker Assembly and attach it to the refrigerator wall with the mounting screws.
Step 9: Reconnect the water line and make sure it is secured to the refrigerator wall.
Step 10: Position the back panel and return the screws to secure it in place.
Step 11: Plug in the refrigerator and turn on the water supply.
Step 12: Test the new Ice Maker for proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
