Online Sale!
100% Guaranteed Genuine Parts
DA81-08632A Samsung Refrigerator Regulator Hx Dyws4 Assembly
DA81-08632A Samsung Hx Regulator Dyws4
Compatible Brands
About this product
DA81-08632A Samsung Hx Regulator Dyws4
The following parts are replaced by this product
- 107410
No more associated models for this part.
Instructions for Replacing the Samsung DA81-08632A SVC-HX Regulator Assembly
1. Unplug all electrical connections from the refrigerator before you start.
2. Disconnect the water supply line from the refrigerator and turn the valve off.
3. Remove the refrigerator from its location and lay it on its back.
4. Remove the screws holding the food compartments in place.
5. Remove the fan cover and pull the old regulator assembly out of the unit.
6. Install the new regulator assembly in the same position as the old one and secure it with the screws provided.
7. Replace the fan cover.
8. Place the food compartments back into place and secure them with the screws.
9. Turn the water supply valve back on and reconnect the water supply line to the refrigerator.
10. Reconnect all electrical connections and turn the refrigerator on.
11. Test the regulator assembly to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug all electrical connections from the refrigerator before you start.
2. Disconnect the water supply line from the refrigerator and turn the valve off.
3. Remove the refrigerator from its location and lay it on its back.
4. Remove the screws holding the food compartments in place.
5. Remove the fan cover and pull the old regulator assembly out of the unit.
6. Install the new regulator assembly in the same position as the old one and secure it with the screws provided.
7. Replace the fan cover.
8. Place the food compartments back into place and secure them with the screws.
9. Turn the water supply valve back on and reconnect the water supply line to the refrigerator.
10. Reconnect all electrical connections and turn the refrigerator on.
11. Test the regulator assembly to make sure it is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.