DA81-01345B Samsung Refrigerator Door Spring
Door spring works with some Samsung models of fridges.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Door spring works with some Samsung models of fridges.
Write Your Own Review
The following parts are replaced by this product
- DA61-07471A
Replacing the DA81-01345B Samsung Refrigerator Door Spring
Tools Needed:
*Phillips head screwdriver
*A flathead screwdriver
Step 1: Unplug your refrigerator from the wall outlet. You will also need to turn off the water if it is connected to a water supply.
Step 2: Remove all food items and set aside.
Step 3: Locate the top hinge cover at the center of the door. This cover is held in place by two Phillips head screws; remove them using your Phillips head screwdriver.
Step 4: Inside the hinge cover are three screws that attach the spring to the back of the door. Remove these screws, using the Phillips head screwdriver, and set aside.
Step 5: Pull the old spring away from the door and slide the new spring into place. Reattach the screws using the Phillips head screwdriver.
Step 6: Place the hinge cover back in place and secure with the two Phillips head screws.
Step 7: Close the door and make sure the spring is securely attached by gently tugging on the door.
Step 8: Plug the refrigerator back into the wall outlet and turn the water back on if applicable.
Congratulations, you have successfully replaced the DA81-01345B Samsung Refrigerator Door Spring!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
*Phillips head screwdriver
*A flathead screwdriver
Step 1: Unplug your refrigerator from the wall outlet. You will also need to turn off the water if it is connected to a water supply.
Step 2: Remove all food items and set aside.
Step 3: Locate the top hinge cover at the center of the door. This cover is held in place by two Phillips head screws; remove them using your Phillips head screwdriver.
Step 4: Inside the hinge cover are three screws that attach the spring to the back of the door. Remove these screws, using the Phillips head screwdriver, and set aside.
Step 5: Pull the old spring away from the door and slide the new spring into place. Reattach the screws using the Phillips head screwdriver.
Step 6: Place the hinge cover back in place and secure with the two Phillips head screws.
Step 7: Close the door and make sure the spring is securely attached by gently tugging on the door.
Step 8: Plug the refrigerator back into the wall outlet and turn the water back on if applicable.
Congratulations, you have successfully replaced the DA81-01345B Samsung Refrigerator Door Spring!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
