DA61-08247A Samsung Refrigerator Freezer Door Handle Support Spring
Door handle support spring for some models of Samsung fridges and freezers.
Door handle support spring for some models of Samsung fridges and freezers.
Write Your Own Review
Replacing the DA61-08247A Samsung Refrigerator Freezer Door Handle Support Spring
1. Gather your tools: flathead screwdriver, adjustable wrench and needle-nose pliers.
2. Carefully unscrew the old handle from the refrigerator door. Use a flathead screwdriver to loosen the screws that hold the handle in place.
3. Remove the old handle.Gently pull on the handle with your fingers and then using your needle-nose pliers to remove it completely.
4. Unscrew the support spring. Use the adjustable wrench to remove the screws holding the support spring in place.
5. Replace the support spring with a new one. Secure the spring by tightening the screws with an adjustable wrench.
6. Replace the handle. Slide the handle into place and use a flathead screwdriver to tighten the screws.
7. Test the handle. Make sure the handle is firmly in place and that it operates properly.
Follow these steps and you can easily replace the DA61-08247A Samsung Refrigerator Freezer Door Handle Support Spring yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Gather your tools: flathead screwdriver, adjustable wrench and needle-nose pliers.
2. Carefully unscrew the old handle from the refrigerator door. Use a flathead screwdriver to loosen the screws that hold the handle in place.
3. Remove the old handle.Gently pull on the handle with your fingers and then using your needle-nose pliers to remove it completely.
4. Unscrew the support spring. Use the adjustable wrench to remove the screws holding the support spring in place.
5. Replace the support spring with a new one. Secure the spring by tightening the screws with an adjustable wrench.
6. Replace the handle. Slide the handle into place and use a flathead screwdriver to tighten the screws.
7. Test the handle. Make sure the handle is firmly in place and that it operates properly.
Follow these steps and you can easily replace the DA61-08247A Samsung Refrigerator Freezer Door Handle Support Spring yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
