MHY64083701 LG Spring
Spring works with some LG models of Ranges
Spring works with some LG models of Ranges
Write Your Own Review
How to Replace an LG MHY64083701 Spring
1. Unplug the appliance from the power source and turn off any gas supply.
2. Depending on your model, remove either the rear or top of your appliance to access the spring.
3. Remove the casing, being careful to note any clips or screws that may be holding things in place.
4. Identify the spring that needs replacing, it will be attached to the drum and the outside wall of the appliance.
5. Disconnect the spring, noting how it was attached and which side was attached to the inside of the appliance, taking care not to force it.
6. Use a pair of pliers to detach the old spring, noting the condition of the pins as they were when they were removed.
7. Take the new spring and attach it to the same location as the old spring, ensuring all connections are tight and secure.
8. If there were any clips or screws that held the casing in place, reattach them and place the casing back onto the appliance.
9. Plug the appliance back into the power source and turn on the gas supply if necessary.
10. Test the appliance to ensure that the spring has been successfully installed.
By following these steps, you can easily replace the LG MHY64083701 Spring in your appliance. Be sure to take extra precaution when dealing with gas appliances and always wear protective gear when appropriate.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the appliance from the power source and turn off any gas supply.
2. Depending on your model, remove either the rear or top of your appliance to access the spring.
3. Remove the casing, being careful to note any clips or screws that may be holding things in place.
4. Identify the spring that needs replacing, it will be attached to the drum and the outside wall of the appliance.
5. Disconnect the spring, noting how it was attached and which side was attached to the inside of the appliance, taking care not to force it.
6. Use a pair of pliers to detach the old spring, noting the condition of the pins as they were when they were removed.
7. Take the new spring and attach it to the same location as the old spring, ensuring all connections are tight and secure.
8. If there were any clips or screws that held the casing in place, reattach them and place the casing back onto the appliance.
9. Plug the appliance back into the power source and turn on the gas supply if necessary.
10. Test the appliance to ensure that the spring has been successfully installed.
By following these steps, you can easily replace the LG MHY64083701 Spring in your appliance. Be sure to take extra precaution when dealing with gas appliances and always wear protective gear when appropriate.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
