MHY62044103 LG Refrigerator Mullion Spring

Step 1: Shut Off the Power to the Refrigerator. Before attempting any repair work on the refrigerator, you need to shut off the power to it in order for you to work safely.

Step 2: Remove the Mullion Spring. After shutting off the power to the refrigerator, you need to find the mullion spring. It is located at the bottom panel of the door, where the door seals meet the refrigerator body. You will need to pull the spring out of its bracket before proceeding with the repair.

Step 3: Install the New Mullion Spring. To install the new mullion spring, you will need to attach the spring to the bracket first. Next, insert the other end of the spring into the slot at the bottom of the door. Finally, press down on the spring to secure it in place.

Step 4: Reconnect the Power. Once the new mullion spring has been installed, you then need to reconnect the power to your refrigerator and turn it back on. This will allow you to use your refrigerator again.

Step 5: Test the Refrigerator. Lastly, once the power has been reconnected, you should check and make sure that the new mullion spring is functioning properly. You can do this by checking for any signs of leakage or a loss of cooling efficiency.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.