MDS47123608 LG Washer Door Boot Gasket Bellows Seal
LG Electronics Sears Kenmore Clothes Washer Washing Machine DOOR BOOT GASKET BELLOWS SEAL MDS47123608
Weight : 12.334600 lbs
Dimension : 20.400000 x 19.550000 x 6.000000
LG Electronics Sears Kenmore Clothes Washer Washing Machine DOOR BOOT GASKET BELLOWS SEAL MDS47123608
Weight : 12.334600 lbs
Dimension : 20.400000 x 19.550000 x 6.000000
Write Your Own Review
Step-by-Step Guide to Replacing the MDS47123608 LG Washer Door Boot Gasket Bellows Seal
1. Purchase a replacement gasket bellows seal specifically designed for your LG washer. Make sure you have the correct model number and make before purchasing.
2. Unplug the power cord from the wall outlet and turn off the hot and cold water supply lines.
3. Remove the screws that secure the washer’s top panel. Once the screws are removed, lift the top panel off and set aside.
4. Open the door of the washer and locate the old gasket bellows seal.
5. Carefully remove the old seal by grasping it at the center and pulling it away from the door frame.
6. Clean off the surface of the door frame and surrounding area with a damp cloth, removing any debris and buildup.
7. Open the packaging of the new gasket bellows seal and carefully peel off the protective paper backing, revealing the adhesive side of the seal.
8. Carefully line up the new seal with the door frame and press firmly to ensure a tight fit.
9. Replace the top panel and secure with the screws you removed in step two.
10. Turn the hot and cold water supply lines back on and plug the power cord into the wall outlet.
Your MDS47123608 LG Washer Door Boot Gasket Bellows Seal is now replaced. Enjoy the peace of mind that comes with taking care of such maintenance issues yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Purchase a replacement gasket bellows seal specifically designed for your LG washer. Make sure you have the correct model number and make before purchasing.
2. Unplug the power cord from the wall outlet and turn off the hot and cold water supply lines.
3. Remove the screws that secure the washer’s top panel. Once the screws are removed, lift the top panel off and set aside.
4. Open the door of the washer and locate the old gasket bellows seal.
5. Carefully remove the old seal by grasping it at the center and pulling it away from the door frame.
6. Clean off the surface of the door frame and surrounding area with a damp cloth, removing any debris and buildup.
7. Open the packaging of the new gasket bellows seal and carefully peel off the protective paper backing, revealing the adhesive side of the seal.
8. Carefully line up the new seal with the door frame and press firmly to ensure a tight fit.
9. Replace the top panel and secure with the screws you removed in step two.
10. Turn the hot and cold water supply lines back on and plug the power cord into the wall outlet.
Your MDS47123608 LG Washer Door Boot Gasket Bellows Seal is now replaced. Enjoy the peace of mind that comes with taking care of such maintenance issues yourself.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
