MCJ61861201 LG Washer Agitator Shift Actuator Coupling
LG Electronic Sears Kenmore Clothes Washer Washing Machine Shift Agitator Actuator Coupling MCJ61861201
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 0.036900 lbs
Dimension : 2.650000 x 2.700000 x 1.000000
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
LG Electronic Sears Kenmore Clothes Washer Washing Machine Shift Agitator Actuator Coupling MCJ61861201
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts (out of product warranty parts only). Trust us for all of your LG Electronics appliance parts and accessories needs.
Weight : 0.036900 lbs
Dimension : 2.650000 x 2.700000 x 1.000000
Write Your Own Review
The following parts are replaced by this product
- MCJ61941202
1. Shut off the power supply to the washer and unplug it.
2. Locate the agitator shaft, located in the center of the tub, at the base of the agitator.
3. Remove the two screws that hold the agitator shift actuator coupling in place.
4. Unscrew the agitator shift actuator coupling from the agitator shaft.
5. Replace the old agitator shift actuator coupling with the new one.
6. Secure the new agitator shift actuator coupling with the two screws.
7. Plug back in the power supply and turn on the washer.
8. Verify that the agitator shift actuator coupling is working properly by running a cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Locate the agitator shaft, located in the center of the tub, at the base of the agitator.
3. Remove the two screws that hold the agitator shift actuator coupling in place.
4. Unscrew the agitator shift actuator coupling from the agitator shaft.
5. Replace the old agitator shift actuator coupling with the new one.
6. Secure the new agitator shift actuator coupling with the two screws.
7. Plug back in the power supply and turn on the washer.
8. Verify that the agitator shift actuator coupling is working properly by running a cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
