AGL75172632 LG Dishwasher Control Panel Assembly

DIY – How to Replace an LG Dishwasher Control Panel Assembly (AGL75172632)

Are you experiencing problems with your LG dishwasher control panel and need to replace it? Replacing the control panel assembly (AGL75172632) on an LG dishwasher is a straightforward DIY project, though it will require a few tools and some patience. This guide will walk you through each step of the replacement process. Let’s get started!

Tools Needed:

• Phillips screwdriver

• Flat-head screwdriver

• Ratchet and socket set

• Adjustable wrench

• Putty knife

Instructions:

1. Unplug your dishwasher from the power source and turn off the breaker in the main circuit box.

2. Remove the screws on the inside of the door to release the door panel.

3. Disconnect the wire harness for the control panel by releasing the locking tab and gently pulling the connector out.

4. Using a ratchet or adjustable wrench, remove the screws that secure the control panel to the dishwasher frame.

5. Carefully lift the control panel out of the dishwasher frame.

6. Insert the new control panel and secure it to the dishwasher frame using the screws.

7. Reconnect the wire harness for the control panel.

8. Secure the door panel back onto the dishwasher, reinstall the screws, and plug in the appliance.

9. Restore power to the dishwasher by switching the breaker back on.

Now your LG dishwasher has a new control panel assembly, and you’re ready to get it working again! Hopefully, this guide was able to help you replace the AGL75172632 control panel assembly. Good luck!

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.