AEB73785615 LG Refrigerator Freezer Evaporator Fan Motor Grille Assembly

1. Shut off the power to the refrigerator. Unplug it from the wall. You should also turn off the water supply to the refrigerator.

2. Carefully move the refrigerator away from the wall and pull out the unit until you can access the back panel.

3. Remove the back panel by removing the five screws that are holding it in place.

4. Once the back panel is removed, locate the evaporator fan motor grill assembly. This is a large plastic piece with a black grill cover.

5. If necessary, remove any other parts that are obstructing easy access to the evaporator fan motor grill assembly.

6. Disconnect the electrical wiring harnesses from the evaporator fan motor grill assembly. Follow safety protocols when disconnecting the wires.

7. Remove the existing evaporator fan motor grill assembly.

8. Attach the new AEB73785615 LG Refrigerator Freezer Evaporator Fan Motor Grill Assembly. Make sure that all connections are secure.

9. Plug in the wiring harnesses.

10. Replace the back panel, making sure that all screws are securely tightened.

11. Push the refrigerator back into its original position and plug it back into the wall.

12. Turn the power on to test the new evaporator fan motor grill assembly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.