ADX73550628 LG Refrigerator Gasket Door Assembly

Replace the ADX73550628 LG Refrigerator Door Gasket Assembly

Instructions:

Tools needed:
- Phillips head screwdriver
- Flathead screwdriver
- Utility knife

Step 1: Begin by removing the screws from the edge of your refrigerator door. Unscrew the screws with a Phillips head screwdriver.

Step 2: Carefully remove the old gasket with a flathead screwdriver. If this is not possible, you can use a utility knife to carefully cut away the old gasket. Make sure to be extremely careful not to damage the door surface.

Step 3: Now it’s time to install the new ADX73550628 LG Refrigerator Door Gasket Assembly. Fit the part onto the door and make sure that the position of the part corresponds to the old one. Secure it in its place with the Phillips head screws.

Step 4: Now it’s time to open the door and test its seal. Close the door and make sure that the airtight seal is complete. If you feel any air escaping from the seal, then you may need to adjust the screws on the side of the door or make any other adjustments necessary.

And there you have it! You’ve successfully replaced the ADX73550628 LG Refrigerator Door Gasket Assembly.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.