4986ER0004F LG Washer Door Boot Gasket Bellows With Drain Hole
Part #: LGE 4986ER0004F
LG Electronics Sears Kenmore Clothes Washer DOOR BOOT GASKET BELLOWS WITH DRAIN HOLE 4986ER0004F
We are a Factory Authorized Parts Distributor for Frigidaire Electrolux. Trust us for all of your Frigidaire Electrolux appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Frigidaire Electrolux. Trust us for all of your Frigidaire Electrolux appliance parts and accessories needs.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
LG Electronics Sears Kenmore Clothes Washer DOOR BOOT GASKET BELLOWS WITH DRAIN HOLE 4986ER0004F
We are a Factory Authorized Parts Distributor for Frigidaire Electrolux. Trust us for all of your Frigidaire Electrolux appliance parts and accessories needs.
We are a Factory Authorized Parts Distributor for Frigidaire Electrolux. Trust us for all of your Frigidaire Electrolux appliance parts and accessories needs.
Write Your Own Review
The following parts are replaced by this product
- 4986ER0004J
Replacing a 4986ER0004F LG Washer Door Boot Gasket Bellows with Drain Hole
DIY Instructions
1. Unplug your washer and shut off the water supply. Make sure you have an empty washer before proceeding.
2. Using a Phillips screwdriver, remove the screws securing the lid and the control panel.
3. Lift the lid and the control panel to expose the bellows.
4. Loosen the clamp around the bellows with a pair of pliers.
5. Pull the bellows away from the tub and discard it.
6. Take the new bellows and insert it into the opening created by the old bellows.
7. Secure the bellows in place with the clamp you removed in step 4.
8. Replace the screws you removed in step 2 and close the lid.
9. Plug the washer in and turn on the water supply.
10. Powder the washer and test for proper operation.
Congratulations! You have successfully replaced the 4986ER0004F LG Washer Door Boot Gasket Bellows with Drain Hole!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
DIY Instructions
1. Unplug your washer and shut off the water supply. Make sure you have an empty washer before proceeding.
2. Using a Phillips screwdriver, remove the screws securing the lid and the control panel.
3. Lift the lid and the control panel to expose the bellows.
4. Loosen the clamp around the bellows with a pair of pliers.
5. Pull the bellows away from the tub and discard it.
6. Take the new bellows and insert it into the opening created by the old bellows.
7. Secure the bellows in place with the clamp you removed in step 4.
8. Replace the screws you removed in step 2 and close the lid.
9. Plug the washer in and turn on the water supply.
10. Powder the washer and test for proper operation.
Congratulations! You have successfully replaced the 4986ER0004F LG Washer Door Boot Gasket Bellows with Drain Hole!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
