Online Sale!
100% Guaranteed Genuine Parts
4861FR3068C LG Clamp
4861FR3068C LG Clamp
Weight : 0.00 lbs
Dimension : 0.45 x 0.55 x 0.45
Compatible Brands
About this product
4861FR3068C LG Clamp
Weight : 0.00 lbs
Dimension : 0.45 x 0.55 x 0.45
Replacing the 4861FR3068C LG Clamp
If your LG washer is not draining water properly, you may need to replace the 4861FR3068C LG clamp. This procedure should take about 15 minutes and requires a Phillips-head screwdriver.
Step 1: Unplug your washing machine from the power source and shut off the nearest water supply.
Step 2: Remove any clothing or items from your washer's drum.
Step 3: Use a Phillips-head screwdriver to unscrew and remove the back panel of the washer.
Step 4: Locate the 4861FR3068C LG clamp and disconnect any hoses or wires connected to it.
Step 5: Unscrew the clamp using a Phillips-head screwdriver.
Step 6: Take note of where the hoses or wires were connected and disconnect them from the old clamp.
Step 7: Take the new 4861FR3068C clamp and attach it to the same hoses or wires that were disconnected from the old clamp.
Step 8: Screw the new clamp into place with a Phillips-head screwdriver.
Step 9: Put the back panel of the washer back in place and secure it with the screws.
Step 10: Turn on the nearest water supply, followed by plugging your washing machine back into the power source.
Step 11: Run a test cycle to make sure the washing machine is draining correctly.
You have now replaced the 4861FR3068C LG clamp!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
If your LG washer is not draining water properly, you may need to replace the 4861FR3068C LG clamp. This procedure should take about 15 minutes and requires a Phillips-head screwdriver.
Step 1: Unplug your washing machine from the power source and shut off the nearest water supply.
Step 2: Remove any clothing or items from your washer's drum.
Step 3: Use a Phillips-head screwdriver to unscrew and remove the back panel of the washer.
Step 4: Locate the 4861FR3068C LG clamp and disconnect any hoses or wires connected to it.
Step 5: Unscrew the clamp using a Phillips-head screwdriver.
Step 6: Take note of where the hoses or wires were connected and disconnect them from the old clamp.
Step 7: Take the new 4861FR3068C clamp and attach it to the same hoses or wires that were disconnected from the old clamp.
Step 8: Screw the new clamp into place with a Phillips-head screwdriver.
Step 9: Put the back panel of the washer back in place and secure it with the screws.
Step 10: Turn on the nearest water supply, followed by plugging your washing machine back into the power source.
Step 11: Run a test cycle to make sure the washing machine is draining correctly.
You have now replaced the 4861FR3068C LG clamp!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review