4581DD3003C LG Dishwasher Roller Assembly
Part #: LGE 4581DD3003C
Roller assembly for some models of LG dishwashers.
Roller assembly for some models of LG dishwashers.
Write Your Own Review
Step 1. Prepare the Work Area: Turn off the power to the dishwasher and move the appliance out from under the countertop to provide yourself with ample workspace. Place a soft mat underneath the dishwasher to protect your floor.
Step 2. Unfasten the Dishwasher Panel: Use a Phillips screwdriver to unfasten the screws that hold the dishwasher’s lower panel in place. Carefully remove the panel to gain access to the inner components.
Step 3. Remove the Roller Assembly: Locate the old roller assembly, which is typically situated on the side wall of the dishwasher. Unscrew the screws that hold it in place and then slowly pull it away from the side wall.
Step 4. Install the New Roller Assembly: Replace the old roller assembly with the new 4581DD3003C LG Dishwasher Roller Assembly. Secure the screws tightly to ensure a secure fit.
Step 5. Reinstall the Lower Panel: Place the panel back over the components and fasten the screws tightly to complete the repair.
Step 6. Test the Dishwasher: Push the dishwasher back into position and turn on the power. Test the dishwasher by running a cycle to make sure the roller assembly works as expected.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 2. Unfasten the Dishwasher Panel: Use a Phillips screwdriver to unfasten the screws that hold the dishwasher’s lower panel in place. Carefully remove the panel to gain access to the inner components.
Step 3. Remove the Roller Assembly: Locate the old roller assembly, which is typically situated on the side wall of the dishwasher. Unscrew the screws that hold it in place and then slowly pull it away from the side wall.
Step 4. Install the New Roller Assembly: Replace the old roller assembly with the new 4581DD3003C LG Dishwasher Roller Assembly. Secure the screws tightly to ensure a secure fit.
Step 5. Reinstall the Lower Panel: Place the panel back over the components and fasten the screws tightly to complete the repair.
Step 6. Test the Dishwasher: Push the dishwasher back into position and turn on the power. Test the dishwasher by running a cycle to make sure the roller assembly works as expected.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.