4581DD3003B LG Dishwasher Clip-On Dishrack Roller Axle Assembly
Part #: LGE 4581DD3003B
LG Electronics Sears Kenmore D/W Dishwasher LOWER RACK ROLLER ASSEMBLY 4581DD3003B
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
LG Electronics Sears Kenmore D/W Dishwasher LOWER RACK ROLLER ASSEMBLY 4581DD3003B
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
We are a Factory Authorized Distributor for LG Electronics appliance parts. Trust us for all of your LG Electronics appliance parts and accessories needs.
Write Your Own Review
How to Replace the 4581DD3003B LG Dishwasher Clip-On Dishrack Roller Axle Assembly
Replacing the 4581DD3003B LG Dishwasher Clip-On Dishrack Roller Axle Assembly is an easy DIY task that requires only basic tools. This guide will provide step-by-step instructions to help you replace this part quickly and easily.
Tools You Will Need:
• Phillips head screwdriver
• Ratchet set
• 5/16” socket wrench
• Socket set
• Pliers
Instructions:
1. Begin by unplugging the dishwasher from its power source.
2. Carefully remove the lower dish rack from the dishwasher.
3. Remove the screws located at the bottom of the dishrack using the Phillips head screwdriver.
4. Using the ratchet and socket set, remove the two bolts holding the axle assembly in place.
5. Pull the axle assembly out of the dishwasher.
6. Take the new axle assembly, and using the 5/16” socket wrench and socket set, attach it to the lower dish rack.
7. Fit the lower dish rack back into the dishwasher, making sure that the axle is secure.
8. Use the pliers to pinch off the clips that hold the upper dish rack in place.
9. Place the upper dish rack in the dishwasher, and use the remaining screws to secure the upper dish rack to the axle assembly.
10. Plug the dishwasher back into the power source, and test the dishwasher to make sure the axle assembly is working properly.
That's it! You have now successfully replaced the 4581DD3003B LG Dishwasher Clip-On Dishrack Roller Axle Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the 4581DD3003B LG Dishwasher Clip-On Dishrack Roller Axle Assembly is an easy DIY task that requires only basic tools. This guide will provide step-by-step instructions to help you replace this part quickly and easily.
Tools You Will Need:
• Phillips head screwdriver
• Ratchet set
• 5/16” socket wrench
• Socket set
• Pliers
Instructions:
1. Begin by unplugging the dishwasher from its power source.
2. Carefully remove the lower dish rack from the dishwasher.
3. Remove the screws located at the bottom of the dishrack using the Phillips head screwdriver.
4. Using the ratchet and socket set, remove the two bolts holding the axle assembly in place.
5. Pull the axle assembly out of the dishwasher.
6. Take the new axle assembly, and using the 5/16” socket wrench and socket set, attach it to the lower dish rack.
7. Fit the lower dish rack back into the dishwasher, making sure that the axle is secure.
8. Use the pliers to pinch off the clips that hold the upper dish rack in place.
9. Place the upper dish rack in the dishwasher, and use the remaining screws to secure the upper dish rack to the axle assembly.
10. Plug the dishwasher back into the power source, and test the dishwasher to make sure the axle assembly is working properly.
That's it! You have now successfully replaced the 4581DD3003B LG Dishwasher Clip-On Dishrack Roller Axle Assembly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.