4561EL3002A LG Dryer Idler Pulley Assembly
Part #: LGE 4561EL3002A
LG Electronics Sears Kenmore Clothes Dryer IDLER PULLEY ASSEMBLY 4561EL3002A
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
LG Electronics Sears Kenmore Clothes Dryer IDLER PULLEY ASSEMBLY 4561EL3002A
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Call us with your LG Electronics Sears Kenmore Appliance model number to be sure you receive the correct LG Electronics Sears Kenmore Appliance parts.
Write Your Own Review
The following parts are replaced by this product
- 4561EL3002B
1. Start by unplugging the dryer and moving it away from the wall.
2. Open up the top of the dryer and prop it up using a block or something similar.
3. To remove the old idler pulley, use a ¼-inch nut driver to loosen the two bolts that hold it in place.
4. Remove the belt from the pulley and then take out the idler pulley assembly.
5. Insert the new 4561EL3002A LG Dryer Idler Pulley Assembly and tighten the two bolts holding it in place with the nut driver.
6. Thread the belt back through the pulley, making sure it is tight and secure.
7. Carefully lower the top of the dryer and plug it back in.
8. Test to make sure the dryer functions correctly and the belt is running without any problems.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Open up the top of the dryer and prop it up using a block or something similar.
3. To remove the old idler pulley, use a ¼-inch nut driver to loosen the two bolts that hold it in place.
4. Remove the belt from the pulley and then take out the idler pulley assembly.
5. Insert the new 4561EL3002A LG Dryer Idler Pulley Assembly and tighten the two bolts holding it in place with the nut driver.
6. Thread the belt back through the pulley, making sure it is tight and secure.
7. Carefully lower the top of the dryer and plug it back in.
8. Test to make sure the dryer functions correctly and the belt is running without any problems.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
