3750ED1005D LG Dishwasher Rack
Part #: LGE 3750ED1005D
Dishrack works with some LG models of Dishwashers
Dishrack works with some LG models of Dishwashers
Write Your Own Review
How to Replace an LG Rack Drum Support (3750ED1005D)
Are you looking to replace the LG Rack Drum Support (3750ED1005D) in your clothes dryer? This easy-to-follow guide will provide you with the instructions and tips you need to properly replace this part so that your dryer can work properly.
What You’ll Need:
• Flathead screwdriver
• Phillips screwdriver
• New drum support spacer (3750ED1005D)
Instructions:
1. Unplug the dryer from the wall. Turn off the gas and water lines as applicable.
2. Remove the screws and metal clips that attach the front panel of the dryer to the back panel.
3. Open the door and remove the lint filter and lint guard.
4. Disconnect the wiring harnesses connected to the drum and the control panel.
5. Remove the screws that secure the drum to the rear panel. Carefully lift the drum away from the cabinet and set it aside.
6. Locate the old drum support spacer. It is mounted to the cabinet with two screws.
7. Remove the old spacer and replace it with the new one (3750ED1005D). Secure it with the screws.
8. Reassemble the dryer in reverse order.
9. Plug the dryer back into the wall, turn on the gas and water lines, and test it for proper operation.
By following these instructions, you should be able to easily replace your LG Rack Drum Support for optimal operation. If you have any questions or need further guidance, please refer to your owner’s manual or contact a qualified technician for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Are you looking to replace the LG Rack Drum Support (3750ED1005D) in your clothes dryer? This easy-to-follow guide will provide you with the instructions and tips you need to properly replace this part so that your dryer can work properly.
What You’ll Need:
• Flathead screwdriver
• Phillips screwdriver
• New drum support spacer (3750ED1005D)
Instructions:
1. Unplug the dryer from the wall. Turn off the gas and water lines as applicable.
2. Remove the screws and metal clips that attach the front panel of the dryer to the back panel.
3. Open the door and remove the lint filter and lint guard.
4. Disconnect the wiring harnesses connected to the drum and the control panel.
5. Remove the screws that secure the drum to the rear panel. Carefully lift the drum away from the cabinet and set it aside.
6. Locate the old drum support spacer. It is mounted to the cabinet with two screws.
7. Remove the old spacer and replace it with the new one (3750ED1005D). Secure it with the screws.
8. Reassemble the dryer in reverse order.
9. Plug the dryer back into the wall, turn on the gas and water lines, and test it for proper operation.
By following these instructions, you should be able to easily replace your LG Rack Drum Support for optimal operation. If you have any questions or need further guidance, please refer to your owner’s manual or contact a qualified technician for assistance.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.