Online Sale!
100% Guaranteed Genuine Parts
3045EL1002P LG Dryer Drum Tub Assembly
LG 3045EL1002P OEM Dryer Drum Tub Assembly. This is the inner drum for a few LG dryers. Please check part compatability by model number beofre purchasing.
Weight : 97.701000 lbs
Dimension : 27.000000 x 27.000000 x 26.000000
Compatible Brands
About this product
LG 3045EL1002P OEM Dryer Drum Tub Assembly. This is the inner drum for a few LG dryers. Please check part compatability by model number beofre purchasing.
Weight : 97.701000 lbs
Dimension : 27.000000 x 27.000000 x 26.000000
The following parts are replaced by this product
- 3045EL1002Q
- 3045EL1002D
- 3045EL1002J
Replacing the 3045EL1002P LG Dryer Drum Tub Assembly
Instructions
1. Unplug the dryer from the power outlet and remove the lint screen.
2. Take off the lint filter housing by unscrewing the two screws on the bottom of the dryer.
3. Slide the top panel of the dryer up and off.
4. Unscrew the drum’s four screws on the outer ring.
5. Disconnect the wiring harness connecting the drum to the motor.
6. Pull the drum out of the dryer housing.
7. Remove the old drum tub assembly by using a screwdriver to remove the screws on the side of the assembly.
8. Slide the new 3045EL1002P LG Dryer Drum Tub Assembly into the dryer housing.
9. Reconnect the wiring harness back to the motor.
10. Screw the outer ring of the drum back into the housing.
11. Slide the top panel of the dryer back onto the housing.
12. Replace the lint filter housing and securely screw it in place.
13. Replace the lint screen and plug the dryer back into the power outlet.
14. Test the dryer by running it on a high-heat cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions
1. Unplug the dryer from the power outlet and remove the lint screen.
2. Take off the lint filter housing by unscrewing the two screws on the bottom of the dryer.
3. Slide the top panel of the dryer up and off.
4. Unscrew the drum’s four screws on the outer ring.
5. Disconnect the wiring harness connecting the drum to the motor.
6. Pull the drum out of the dryer housing.
7. Remove the old drum tub assembly by using a screwdriver to remove the screws on the side of the assembly.
8. Slide the new 3045EL1002P LG Dryer Drum Tub Assembly into the dryer housing.
9. Reconnect the wiring harness back to the motor.
10. Screw the outer ring of the drum back into the housing.
11. Slide the top panel of the dryer back onto the housing.
12. Replace the lint filter housing and securely screw it in place.
13. Replace the lint screen and plug the dryer back into the power outlet.
14. Test the dryer by running it on a high-heat cycle.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review