Online Sale!
VERTICAL8 Greenwald Coin Slide Chute, $0 to $2.00
VERTICAL8 Greenwald Coin Slide Chute (0 To $2.00)
Weight : 0.727600 lbs
Dimension : 9.133800 x 3.700700 x 2.992100
Compatible Brands
About this product
VERTICAL8 Greenwald Coin Slide Chute (0 To $2.00)
Weight : 0.727600 lbs
Dimension : 9.133800 x 3.700700 x 2.992100
The following parts are replaced by this product
- VERT-8
- 20-00-000-200
No more associated models for this part.
Replacing a Vertical8 Greenwald Industries Coin Slide Chute
Step 1: Unplug the machine. Before beginning the replacement process, make sure the machine is unplugged from any power sources to ensure safety during the replacement process.
Step 2: Remove the coin slide chute. To remove the current coin slide chute, you will need to unscrew the screws located in the back of the machine with a Phillips screwdriver. Carefully lift the chute away from the machine and set it aside.
Step 3: Install the new coin slide chute. Line up the new coin slide chute with the mounting points in the machine, and tighten the screws that were previously removed.
Step 4: Test the coin slide chute. Plug the machine back in, and test the coin slide chute by inserting coins into the slot. Ensure that the coins are properly accepted and dropped into the collection tray without any issues.
Step 5: Reinstall the back panel. Once you have successfully tested the new coin slide chute, re-install the back panel of the machine and secure it with the remaining screws.
Congratulations! You have successfully replaced your Vertical8 Greenwald Industries Coin Slide Chute.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Step 1: Unplug the machine. Before beginning the replacement process, make sure the machine is unplugged from any power sources to ensure safety during the replacement process.
Step 2: Remove the coin slide chute. To remove the current coin slide chute, you will need to unscrew the screws located in the back of the machine with a Phillips screwdriver. Carefully lift the chute away from the machine and set it aside.
Step 3: Install the new coin slide chute. Line up the new coin slide chute with the mounting points in the machine, and tighten the screws that were previously removed.
Step 4: Test the coin slide chute. Plug the machine back in, and test the coin slide chute by inserting coins into the slot. Ensure that the coins are properly accepted and dropped into the collection tray without any issues.
Step 5: Reinstall the back panel. Once you have successfully tested the new coin slide chute, re-install the back panel of the machine and secure it with the remaining screws.
Congratulations! You have successfully replaced your Vertical8 Greenwald Industries Coin Slide Chute.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review