Online Sale!
8-1275-28-6 Greenwald Money Box Cobra UG800B
8-1275-28-6 Greenwald UG800B Money Box Cobra
Compatible Brands
About this product
8-1275-28-6 Greenwald UG800B Money Box Cobra
No more associated models for this part.
Replacing the UG800B M/BOX COBRA Control Unit
Instructions
1. Ensure that power to the unit is completely shut off. Unplug the electrical cord from the back of the unit or shut off the breaker supplying power to the unit.
2. Disconnect all cables connected to the old M/BOX COBRA Control Unit. This includes any wires, sensors and control modules.
3. If there is a mounting bracket attached to the old unit, detach and remove it.
4. Place the new M/BOX COBRA Control Unit in the same location where the old unit was installed.
5. Attach the mounting bracket (if provided) to the new unit using the hardware supplied.
6. Reconnect all cables that were previously attached to the old unit.
7. Plug in the power cord to the back of the new unit and turn on the power supply.
8. Test the new M/BOX COBRA control unit to ensure it is operating correctly.
9. Enjoy your new UG800B M/BOX COBRA Control Unit!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Instructions
1. Ensure that power to the unit is completely shut off. Unplug the electrical cord from the back of the unit or shut off the breaker supplying power to the unit.
2. Disconnect all cables connected to the old M/BOX COBRA Control Unit. This includes any wires, sensors and control modules.
3. If there is a mounting bracket attached to the old unit, detach and remove it.
4. Place the new M/BOX COBRA Control Unit in the same location where the old unit was installed.
5. Attach the mounting bracket (if provided) to the new unit using the hardware supplied.
6. Reconnect all cables that were previously attached to the old unit.
7. Plug in the power cord to the back of the new unit and turn on the power supply.
8. Test the new M/BOX COBRA control unit to ensure it is operating correctly.
9. Enjoy your new UG800B M/BOX COBRA Control Unit!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review