WR60X26085 GE Refrigerator Evaporator Fan Motor

Step 1: Unplug your GE refrigerator to disconnect the power before beginning any maintenance.

Step 2: Locate the evaporator fan motor inside the fridge. This can be found on the back wall behind the freezer.

Step 3: Remove the evaporator fan motor by unscrewing the two screws that are holding it in place.

Step 4: Disconnect the wiring harness from the evaporator fan motor. This can be done by gently pulling on the connector until it slides off.

Step 5: Install the replacement Bitron WR60X26085 evaporator fan motor by securing it with the two screws and then connecting the wiring harness.

Step 6: Plug the refrigerator back in to restore power.

Step 7: Monitor the operation of the new evaporator fan motor for correct performance.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.