WR24X10228 GE Refrigerator Freezer Door Seal Gasket

Tools Needed:
1. Phillips head screwdriver
2. Putty knife
3. Ruler
4. Clean rag

Step 1: Inspect the current freezer door seal gasket to ensure it needs replacing. If the gasket is worn, torn, or cracked, it may need to be replaced.

Step 2: Remove the screws located around the perimeter of the freezer door with a Phillips head screwdriver. Gently pull the inner wall of the freezer door away from the outer wall to detach them.

Step 3: Use a putty knife to carefully remove the old gasket from the outer wall of the freezer door.

Step 4: Measure the length, width, and depth of the new WR24X10228 GE Refrigerator Freezer Door Seal Gasket. Make sure to get exact measurements so the new gasket fits properly.

Step 5: Place the new gasket into the groove in the outer wall of the freezer door. Use a clean rag or a finger to press down around the edges for a secure fit.

Step 6: Reattach the inner wall of the freezer door to the outer wall by pressing them back together and securing with the screws. Tighten the screws with a Phillips head screwdriver.

Step 7: Test the fit by closing the freezer door. The new gasket should be snug and make a perfect seal.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.