WR21X30013 GE Refrigerator Mounting Bracket
This Genuine GE WR21X30013 Evaporator Fan Front Bracket is a durable replacement part for many GE, Hotpoint, and RCA Refrigerators. Get your fridge working again with this reliable part today! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
This Genuine GE WR21X30013 Evaporator Fan Front Bracket is a durable replacement part for many GE, Hotpoint, and RCA Refrigerators. Get your fridge working again with this reliable part today! We're your #1 source for genuine OEM appliance parts. Contact us for further questions as well as any other appliance parts needs!
Write Your Own Review
The following parts are replaced by this product
- WR02X10516
1. Shut off the power to the fridge before beginning this repair. Unplug it from the wall or turn off the power at the circuit breaker.
2. Remove the screws at the top of the evaporator compartment cover, and remove the cover.
3. Locate the fan bracket, which is located just under the evaporator. It is usually held in place by two (2) mounting screws.
4. Remove the screws that secure the fan bracket to the evaporator.
5. Once the screws are removed, the old fan bracket can be taken out and a new one can be put into place.
6. Secure the new fan bracket in place with the screws you removed in step 4.
7. Re-install the evaporator compartment cover, securing it with the screws you removed in step 2.
8. Turn the power back on and test to make sure the fan bracket is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the screws at the top of the evaporator compartment cover, and remove the cover.
3. Locate the fan bracket, which is located just under the evaporator. It is usually held in place by two (2) mounting screws.
4. Remove the screws that secure the fan bracket to the evaporator.
5. Once the screws are removed, the old fan bracket can be taken out and a new one can be put into place.
6. Secure the new fan bracket in place with the screws you removed in step 4.
7. Re-install the evaporator compartment cover, securing it with the screws you removed in step 2.
8. Turn the power back on and test to make sure the fan bracket is working properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
No more associated models for this part.
