Online Sale!
100% Guaranteed Genuine Parts
WR17X23191 GE Refrigerator Ice Bucket and Auger Assembly
WR17X23191 GE Refrigerator Ice Bucket and Auger Assembly
Weight : 18.755600 lbs
Dimension : 19.094400 x 12.519600 x 10.905500
Compatible Brands



About this product
WR17X23191 GE Refrigerator Ice Bucket and Auger Assembly
Weight : 18.755600 lbs
Dimension : 19.094400 x 12.519600 x 10.905500
The following parts are replaced by this product
- WR17X10768
- WR17X11429
- WR17X11307
Replacing the WR17X23191 GE Ice Bucket and Auger Assembly
1. Unplug the refrigerator from the wall and move it away from the wall to gain access to the back of the freezer compartment.
2. Remove the screws securing the rear freezer panel and remove the panel to access the ice maker.
3. Disconnect the electrical wiring from the rear of the ice maker.
4. Unscrew the mounting screws located on the sides of the ice maker.
5. Lift the ice maker carefully out of the freezer and place it onto a stable work surface.
6. Remove the screws that hold the ice bucket in place.
7. Pull out the old ice bucket and auger assembly.
8. Line up the new ice bucket and auger assembly with the slots in the ice maker housing.
9. Secure the new ice bucket and auger assembly with the screws removed from the old one.
10. Reattach the wiring and screws to secure the ice maker back into place.
11. Replace the rear freezer panel and secure it with the screws.
12. Slide the refrigerator back into place and plug it into the wall.
13. Turn on the refrigerator and test the ice maker to ensure proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
1. Unplug the refrigerator from the wall and move it away from the wall to gain access to the back of the freezer compartment.
2. Remove the screws securing the rear freezer panel and remove the panel to access the ice maker.
3. Disconnect the electrical wiring from the rear of the ice maker.
4. Unscrew the mounting screws located on the sides of the ice maker.
5. Lift the ice maker carefully out of the freezer and place it onto a stable work surface.
6. Remove the screws that hold the ice bucket in place.
7. Pull out the old ice bucket and auger assembly.
8. Line up the new ice bucket and auger assembly with the slots in the ice maker housing.
9. Secure the new ice bucket and auger assembly with the screws removed from the old one.
10. Reattach the wiring and screws to secure the ice maker back into place.
11. Replace the rear freezer panel and secure it with the screws.
12. Slide the refrigerator back into place and plug it into the wall.
13. Turn on the refrigerator and test the ice maker to ensure proper operation.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review