WR17X11890 GE Refrigerator Door Shelf Bar

DIY Instructions for Replacing the WR17X11890 GE Door Shelf Bar

Replacing the WR17X11890 GE Door Shelf Bar is a relatively simple DIY project that can be completed in under an hour. These easy steps will help you replace this door shelf bar quickly and safely.

Tools & Materials Needed:

-Replacement WR17X11890 GE Door Shelf Bar

-Flathead screwdriver

-Phillips head screwdriver

Steps:

1) Gather the necessary tools and materials and shut off the power to the refrigerator.

2) Remove the screws from the existing door shelf bar using either a Phillips head or flat head screwdriver, depending on the type of screws.

3) Carefully lift the shelf bar off of the hinges and set it aside.

4) Take your replacement WR17X11890 GE Door Shelf Bar and align it with the hinges. Reinstall the screws and tighten them evenly, ensuring the shelf bar is secure.

5) Turn the power back on and test the shelf bar to ensure it is securely in place.

And there you have it! You have successfully replaced the WR17X11890 GE Door Shelf Bar.

Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.