Online Sale!
100% Guaranteed Genuine Parts
WH42X29423 GE Dispenser Drawer
WH42X29423 GE Dispenser Drawer
Weight : 0.71 lbs
Dimension : 7.00 x 7.00 x 2.00
Compatible Brands
About this product
WH42X29423 GE Dispenser Drawer
Weight : 0.71 lbs
Dimension : 7.00 x 7.00 x 2.00
1. Unplug your GE washer and open the lid.
2. Remove the screws at the top of the dispenser drawer.
3. Pull gently on the dispenser drawer to remove it from the washer.
4. Take the new dispenser drawer and line up the holes with the slots on the washer.
5. Secure the drawer in place using the screws you removed in step 2.
6. Plug the washer back in, close the lid and test the new drawer to make sure everything is working properly.
For tips:
1. Replace the GE WH42X29423 Dispenser Drawer with these easy DIY instructions.
2. Unplug your GE Washer before beginning to replace the dispenser drawer.
3. Remove the screws at the top of the dispenser drawer to take it out from the washer.
4. Line up the holes of the new dispenser drawer with the slots of the washer for a secure fit.
5. Use the screws you removed in step 2 to fasten the new dispenser drawer in place.
6. Plug the washer back in, close the lid and test the new drawer to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
2. Remove the screws at the top of the dispenser drawer.
3. Pull gently on the dispenser drawer to remove it from the washer.
4. Take the new dispenser drawer and line up the holes with the slots on the washer.
5. Secure the drawer in place using the screws you removed in step 2.
6. Plug the washer back in, close the lid and test the new drawer to make sure everything is working properly.
For tips:
1. Replace the GE WH42X29423 Dispenser Drawer with these easy DIY instructions.
2. Unplug your GE Washer before beginning to replace the dispenser drawer.
3. Remove the screws at the top of the dispenser drawer to take it out from the washer.
4. Line up the holes of the new dispenser drawer with the slots of the washer for a secure fit.
5. Use the screws you removed in step 2 to fasten the new dispenser drawer in place.
6. Plug the washer back in, close the lid and test the new drawer to ensure it is functioning properly.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review