WH41X22935 GE Washer Tub To Pump Drain Hose
General Electric / RCA / Hotpoint Washer Tub to Pump Drain Hose WH41X22935
● 1-5/8" Diameter X 7" Long
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● 1-5/8" Diameter X 7" Long
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.334900 lbs
Dimension : 8.031400 x 2.677100 x 2.165300
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
General Electric / RCA / Hotpoint Washer Tub to Pump Drain Hose WH41X22935
● 1-5/8" Diameter X 7" Long
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
● 1-5/8" Diameter X 7" Long
We are a Factory Authorized Parts Distributor for General Electric Hotpoint. Trust us for all of your General Electric Hotpoint appliance parts and accessories needs.
Weight : 0.334900 lbs
Dimension : 8.031400 x 2.677100 x 2.165300
Write Your Own Review
The following parts are replaced by this product
- WH41X371
- WH41X10163
- WH41X0371
Materials Needed:
* Philips-head screwdriver
* Replacement WH41X22935 GE Washer Tub to Pump Drain Hose
Instructions:
1. Disconnect the power source from the washer.
2. Find the access panel at the back of the washer and use the Philips-head screwdriver to remove the screws holding the access panel in place.
3. Look for the Tub to Pump Drain Hose and disconnect it from the pump.
4. Take out the old Tub to Pump Drain Hose and replace it with the new WH41X22935 GE Washer Tub to Pump Drain Hose.
5. Reconnect the new Tub to Pump Drain Hose to the pump.
6. Replace the access panel, securing it with the screws you removed previously.
7. Reconnect the washer to its power source.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
* Philips-head screwdriver
* Replacement WH41X22935 GE Washer Tub to Pump Drain Hose
Instructions:
1. Disconnect the power source from the washer.
2. Find the access panel at the back of the washer and use the Philips-head screwdriver to remove the screws holding the access panel in place.
3. Look for the Tub to Pump Drain Hose and disconnect it from the pump.
4. Take out the old Tub to Pump Drain Hose and replace it with the new WH41X22935 GE Washer Tub to Pump Drain Hose.
5. Reconnect the new Tub to Pump Drain Hose to the pump.
6. Replace the access panel, securing it with the screws you removed previously.
7. Reconnect the washer to its power source.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
