WH23X28418 GE Washer Drain Pump Assembly
Part #: GEN WH23X28418
Drain pump assembly works with some GE, and Hotpoint models of washing machines.
Product Details
Reviews
Replaces Parts
Installation Instructions
Compatible Models
Compatible Brands
Drain pump assembly works with some GE, and Hotpoint models of washing machines.
Write Your Own Review
The following parts are replaced by this product
- WH23X24178
- WH23X27574
DIY Guide to Replacing the WH23X28418 GE Washer Drain Pump Assembly
This guide will provide step-by-step instructions on how to replace your WH23X28418 GE Washer Drain Pump Assembly.
Step 1: Unplug your power cord from the wall socket.
Step 2: Disconnect the water lines by loosening the hose clamps and removing the hoses connected to the drain pump.
Step 3: Locate the three screws that secure the drain pump to the washer's base.
Step 4: Using a pair of pliers, remove the screws and carefully remove the drain pump from the washer.
Step 5: Take the new drain pump and identify where it connects to the washer's base.
Step 6: Secure the connection with the three screws removed in step 3.
Step 7: Reconnect the hoses to the new drain pump and tighten the hose clamps.
Step 8: Plug the power cord back into the wall socket.
Step 9: Start a cycle using the same settings as your previous cycle.
If you have successfully followed these steps, then your WH23X28418 GE Washer Drain Pump Assembly should now be safely replaced.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
This guide will provide step-by-step instructions on how to replace your WH23X28418 GE Washer Drain Pump Assembly.
Step 1: Unplug your power cord from the wall socket.
Step 2: Disconnect the water lines by loosening the hose clamps and removing the hoses connected to the drain pump.
Step 3: Locate the three screws that secure the drain pump to the washer's base.
Step 4: Using a pair of pliers, remove the screws and carefully remove the drain pump from the washer.
Step 5: Take the new drain pump and identify where it connects to the washer's base.
Step 6: Secure the connection with the three screws removed in step 3.
Step 7: Reconnect the hoses to the new drain pump and tighten the hose clamps.
Step 8: Plug the power cord back into the wall socket.
Step 9: Start a cycle using the same settings as your previous cycle.
If you have successfully followed these steps, then your WH23X28418 GE Washer Drain Pump Assembly should now be safely replaced.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
