Online Sale!
100% Guaranteed Genuine Parts
WH16X27180 GE Washer Suspension Rod
WH16X27180 GE Washer Suspension Rod
Weight : 3.496400 lbs
Dimension : 27.000000 x 10.000000 x 1.800000
Compatible Brands


About this product
WH16X27180 GE Washer Suspension Rod
Weight : 3.496400 lbs
Dimension : 27.000000 x 10.000000 x 1.800000
Replace Your GE WH16X27180 ROD ASSEMBLY 27"
Replacing the broken rod assembly in your GE WH16X27180 washing machine will quickly restore its performance. Follow these simple steps to replace it.
Tools Needed:
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
Instructions:
1. Unplug your washing machine from the wall outlet and lay it on its back so you can access the bottom of the machine. Use the Phillips head screwdriver to unscrew the eight screws that hold the access panel in place. Pull the access panel away from the base of the machine and set it aside.
2. Locate the broken rod assembly. It is usually situated near the lower-right corner of the machine. Unscrew the four screws that attach it to the machine using the Phillips head screwdriver.
3. Disconnect the wiring harness to the rod assembly by carefully pulling it out of its slot.
4. Clean the area of any lint or debris that may have built up.
5. Take the new rod assembly and slide the wiring harness into its slot. Securely attach the rod assembly to the machine with the four screws.
6. Replace the access panel and secure it with the eight screws.
7. Plug the washing machine into the wall outlet and turn it on to test if the rod assembly is working correctly.
Congratulations, you've successfully replaced your GE WH16X27180 ROD ASSEMBLY 27"!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Replacing the broken rod assembly in your GE WH16X27180 washing machine will quickly restore its performance. Follow these simple steps to replace it.
Tools Needed:
• Phillips head screwdriver
• Flat head screwdriver
• Pliers
Instructions:
1. Unplug your washing machine from the wall outlet and lay it on its back so you can access the bottom of the machine. Use the Phillips head screwdriver to unscrew the eight screws that hold the access panel in place. Pull the access panel away from the base of the machine and set it aside.
2. Locate the broken rod assembly. It is usually situated near the lower-right corner of the machine. Unscrew the four screws that attach it to the machine using the Phillips head screwdriver.
3. Disconnect the wiring harness to the rod assembly by carefully pulling it out of its slot.
4. Clean the area of any lint or debris that may have built up.
5. Take the new rod assembly and slide the wiring harness into its slot. Securely attach the rod assembly to the machine with the four screws.
6. Replace the access panel and secure it with the eight screws.
7. Plug the washing machine into the wall outlet and turn it on to test if the rod assembly is working correctly.
Congratulations, you've successfully replaced your GE WH16X27180 ROD ASSEMBLY 27"!
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Write Your Own Review