WH01X10618 GE Washer Hub Nut
WH01X10618 GE Washer Hub Nut
Weight : 0.043400 lbs
Dimension : 2.677100 x 2.047200 x 1.102300
WH01X10618 GE Washer Hub Nut
Weight : 0.043400 lbs
Dimension : 2.677100 x 2.047200 x 1.102300
Write Your Own Review
Replacing the WH01X10618 GE Hub Nut
Tools Needed:
-wrench (appropriate size to fit the hub nut)
-new WH01X10618 GE hub nut
Step 1: Turn off the power to the appliance. Unplug the cord from the outlet and turn off the circuit breaker or remove the appropriate fuse.
Step 2: Disconnect any hoses or wires connected to the drum. If there are any wires, gently pull the clips off the hub nut.
Step 3: Locate the hub nut at the rear of the appliance. You may need to remove the back panel to access it.
Step 4: Use the wrench to loosen the existing WH01X10618 GE hub nut. It is likely seized so you may need to use some extra force to remove it.
Step 5: Clean off any debris from the area around the hub. This will ensure that the new hub nut sits flat and makes a secure connection.
Step 6: Place the new WH01X10618 GE hub nut in place and tighten it with the wrench.
Step 7: Reconnect any hoses or wires to the drum and replace the back panel if necessary.
Step 8: Turn the power back on to the appliance. Plug the cord back into the outlet and turn on the circuit breaker or replace the fuse.
You have now successfully replaced the WH01X10618 GE hub nut.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
Tools Needed:
-wrench (appropriate size to fit the hub nut)
-new WH01X10618 GE hub nut
Step 1: Turn off the power to the appliance. Unplug the cord from the outlet and turn off the circuit breaker or remove the appropriate fuse.
Step 2: Disconnect any hoses or wires connected to the drum. If there are any wires, gently pull the clips off the hub nut.
Step 3: Locate the hub nut at the rear of the appliance. You may need to remove the back panel to access it.
Step 4: Use the wrench to loosen the existing WH01X10618 GE hub nut. It is likely seized so you may need to use some extra force to remove it.
Step 5: Clean off any debris from the area around the hub. This will ensure that the new hub nut sits flat and makes a secure connection.
Step 6: Place the new WH01X10618 GE hub nut in place and tighten it with the wrench.
Step 7: Reconnect any hoses or wires to the drum and replace the back panel if necessary.
Step 8: Turn the power back on to the appliance. Plug the cord back into the outlet and turn on the circuit breaker or replace the fuse.
You have now successfully replaced the WH01X10618 GE hub nut.
Please keep in mind, these instructions are for general guidance and should always be used in conjunction with the manufacturer's manual, if available.
